LK Automation Limited
Home >> Download >> MITSUBISHI >> Manual Download >> MITSUBISHI A1SJ71E71-B2 User's Manual A1SJ71E71-B2 Hardware Manual

MITSUBISHI A1SJ71E71-B2 User's Manual A1SJ71E71-B2 Hardware Manual

Product model: A1SJ71E71-B2
Name: Ethernet Interface Module
Brand: MITSUBISHI
Sort: Hardware User's Manual
File language: English
File size: 0.16MB
Input type: DC input, positive common end.
Input points: 16 points.
Enter the response time: 0.2ms the following.
Rated input voltage / current: DC24V/5mA.
Output form: transistor output, leakage type.
Output points: 16 points.
OFF leakage current: 0.1mA.
Output protection function: No.
Rated load voltage / current: DC24V/0 A1SJ71E71-B2 User's Manual. 1A.
External connection: 1 line /1 line type.
Fast connector type A1SJ71E71-B2
Simple wiring through quick connector.
Can be installed along the 6 direction.
MITSUBISHI PLC program simulation debugging
The basic idea of program simulation debugging is,
In order to facilitate the form of simulation to generate the actual state of the scene,
Create the necessary environmental conditions for the operation of the program A1SJ71E71-B2 User's Manual.
Depending on the way the field signals are generated,
The simulation debugging has two forms of hardware simulation and software simulation. Close to input / output: 8 DC input or keyboard: 64 DC input, 16 transistor output.
Applicable model: A985/975/970/A960GOT (-B). Output type: transistor output, source.
Output points: 16 points.
OFF leakage current: 0.30mA A1SJ71E71-B2 User's Manual.
Output protection function.
Rated load voltage / current: DC12V/DC24V/0.1A.
External connection: 2 wire.
Waterproof connector type.
Strong waterproof type of IP67 protection grade.
No need to stop the system can be replaced module.
Without the use of tools can be a simple connection, save time.
Terminal resistor built-in.
Can be installed along the 6 direction.
Hardware simulation method is to use a number of hardware equipment to simulate the generation of the signal,
The signals are connected to the input end of the PLC system in a hard wired way, and the timeliness is strong.
Software simulation method is in the MITSUBISHI PLC in the preparation of a set of simulation program,
The simulation provides the field signal, which is simple and easy to operate, but it is not easy to guarantee the timeliness.
Simulation of the process of debugging, debugging method can be used to segment, and the monitoring function of programmer. PLC station distance: 2Km.
Cable type: GI-62.5/125.
The function of the MELSECNET interface module is to connect the main CPU PLC to the MELSECNET data communication system.
As long as the switch on the component to set,
Can determine the CPU PLC is as the main station or in situ station.
There are two modules available for selection: one is the connection of the optical cable network and the network of the coaxial cable.
For a ANSCPU, up to only a piece of interface components can be inserted, A2ASCPU can be inserted 2.
The popularization and application of PLC programming has been developed rapidly in our country,
It has been widely used in all kinds of mechanical equipment and production process of electrical control devices,
All walks of life have emerged a large number of application of PLC transformation of the results of the equipment.
Understand the working principle of PLC, have the ability to design, debug and maintain the PLC control system,
Has become the basic requirements of modern industry for electrical technicians and engineering students.
The instruction list programming language is a programming language similar to assembly language mnemonic,
As well as assembly language by the operation code and the number of operations.
In the case of the computer for the PLC handheld programmer compile user program.
At the same time, the programming language of the instruction list corresponds to the ladder diagram programming language,
In PLC programming software can be converted to each other. Figure 3 is the instruction sheet corresponding to the ladder diagram of figure 2PLC.
The characteristics of instruction table programming languaage is used to represent mnemonic operation function,
Easy to remember, easy to grasp;
In the handheld programmer on the keyboard using the mnemonic representation, easy to operate, can be programmed in computer;
There is a one-tto-one correspondence between the ladder diagram and the ladder diagram A1SJ71E71-B2 Manual A1SJ71E71-B2 Manual. Its characteristics are basically consistent with the ladder diagram language.
Related products
MITSUBISHI
Network module
A1SJ71QE71N-B5T
MITSUBISHI Network module A1SJ71QE71N-B5T
Ethernet network module 10BASE-T / 10BASE5.
MITSUBISHI
Serial communication module
A1SJ71QC24N-R2
MITSUBISHI Serial communication module A1SJ71QC24N-R2
RS-232 2 channel. Transfer speed: 2 channels.
MITSUBISHI
Melsecnet interface module
A1SJ71AP21GE
MITSUBISHI Melsecnet interface module A1SJ71AP21GE
PLC station distance: 2Km. Cale type: GI-62.
MITSUBISHI
Melsecnet module
A1SJ71LP21GE
MITSUBISHI Melsecnet module A1SJ71LP21GE
Using A1SJ71LP21 and A1SJ71BR11MELSECNET/10 m