OMRON CP1E-E10DR-D USER'S MANUAL CP1E-E10DR-D Communications Commands Manual

Model: C200H-B7A12.
I/O points: 32 input points or 30 input points and 2 error inputs.
Weight: 300g max.Power supply voltage: 100 to 240VAC.
Output capacity: 5-VDC output capacity, 2.8A;
24-VDC output capacity, 0.4A;
Total power consumption, 14w.
Options: 24-VDC service power supply, No;
RUN output, No; Maintenance forecast monitor, No CP1E-E10DR-D USER'S MANUAL.
Standards: UC1, N, L, CE CP1E-E10DR-D
Equipped with the RUN output for,
checking the operation status,
as well as the replacement.
notification function for easy,
maintenance.
Lineup of five models including the,
AC power supply (25W).
Stable power supply is available from the,
CJ-series CPU Unit to each I/O Units via the,
dedicated bus. The most suitable Power Supply,
Unit can be selected among various I/O ,
specifications and/or options CP1E-E10DR-D USER'S MANUAL. CV500-MR Memory PC Unit RAM Disk Board 2MB memory CV500-MR261.Model: C200H-IM211.
No. of inputs: 8 pts.
Input voltage: 12 to 24 VAC/DC, +10%/–15%.
Input current: 10mA, 24VDC.
Isolation: Photo-coupler.
Indica-tor: LED.
External connec-tions: Remove-able termi-nal blocks.
Inputs percom-mon: 8 pts.
Internal currentcon-sump-tion: Model: C500-CN222N CP1E-E10DR-D USER'S MANUAL.
Cable length 2m.
CV Series C Series Expansion ← → I / O device CPU Connecting cable(Vertical-wired)Applicable CPU Units: CQM1H-CPU51/61.
Absolute Encoder inputs: 2 inputs.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 90 g max.
Product name: CJ-series I/O Control Unit.
Specifications: Mount one I/O Control Unit,
on the CPU Rack when connecting one or,
more Expansion Racks.
Connecting Cable: CS1W-CN@@3 Expansion,
Connecting Cable Connected Unit:
CJ1W-II101 I/O Interface Unit,
Mount to the right of the CPU Unit.
Current consumption: 5V , 0.02A;
24V, --.
Standards: UC1, N, L, CE.
Expand CJ/NJ-series with These Units.
To expand a CJ/NJ-series Controller,
connect an I/O Control Unit to the CPU Rack,
and I/O Interface Unit to the Expansion RRack,
and connect the two Units with I/O Expansion Cable CP1E-E10DR-D Manual. Output method: Relay.
Inputs: 24.
Outputs: 16.Model: C200H-OD501.
No. of outputs: 32 pts.
Specifications: 5VDC.C1000H-SL SYSMAC BUS SYSMAC LINK C1000H-SLK11.Number of anaalog inputs: 4 inputs CP1E-E10DR-D Manual.
Number of analog outputs: 2 outputs.
Input signal ranges: –10 to 10 V, 0 to 10 V, 0 to 5 V.
Output signal ranges: –10 to 10 V.