128MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.Engineering documents created by the LT interface to download images and logic programming software through the USB interface.USB cable clamp for preventing disconnection of connection (5 / set)7 CA6-DFS04-01 . 5 inches /3.8 inches /5.7 inches, used to connect the power cord (5 / sets)
CA6-DFS04-01COM1 interface with the cable (RS-232C), used to connect directly to the SYSMAC connection module (or other host)512MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.10.4 inches (TFT), the GP will be installed to the hard panel to provide dust and moisture proof function CA6-DFS04-01 . COM2 adapter for converting the COM2 interface to the RS-422 terminal blockFor RGB input USB cable to prevent disconnection (2 / set)10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).The main controller is connected to the host computer interface (can be switched between RS-232C and RS-422) using the isolation module CA6-DFS04-01 . 10.4 inch TFT models applicable parts, for the 10.4 inch man machine interface (TFT) into the 10.4 inch GP2500 (TFT) in the installation of the required accessories.Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.5.7 inches, for the protection of the man-machine interface from oil and chemical pollution (5 / set).13 pin input connectors for HTB and 16 pin output connectors. (1 / set)COM1 pin adapter, which is used to connect the communicationn components that are dedicated to the COM2 interface to the COM1 interface of the man-machine interface CA6-DFS04-01 User's Manual. Suitable for GLC2300 seriesExpansion module for the GP3000 access to the PROFIBUS network and DP PROFIBUS master commmunicationAdapter for EX module (5 / set)12 CA6-DFS04-01 User's Manual. 1 inches /10.4 inches (STN), the GP installed to the hard panel to provide dust and moisture proof function.