DRT2-ID32B-1 I/O connections: MIL connector OMRON DRT2-ID32B-1 Board Terminals with MIL Connector

Specifications: Outputs, PNP (+ common), 32 outputs.
I/O connections: MIL connector.
Rated internal circuit power supply voltage:
Supplied from communications connector.
Rated I/O power supply voltage: 24 VDC.
First Board-type Terminals for Smart Slaves!
Easily modified to handle an array of I/O interfaces,
and eliminates much on-site wiring OMRON DRT2-ID32B-1.
User boards attach easily to the DRT2-@D32BV(-1) using screws DRT2-ID32B-1 Input capacity: 32 points.
Internal I/O common: PNP.
ON voltage: 15 VDC min. (between each in,
put terminal and the G terminal).
OFF voltage: 5 VDC max. (between each in,
put terminal and the G terminal).
OFF current: 1.0 mA max.
Input current: 6.0 mA max./input (at 24-VDC),
3 OMRON DRT2-ID32B-1. 0 mA min./input (at 17-VDC).
ON delay: 0.1 ms max.
OFF delay: 0.2 ms max.
Input filter value: Without filter, 0.5 ms,
1 ms, 2 ms, 4 ms, 8 ms, 16 ms, 32 ms.
(Default setting: 1ms)
Number of circuits per common: 32 points/common.
Input indicators: LED display (yellow).
Isolation method: No isolation.
I/O power supply method: Supplied from unit power supply.
Input device supply current: 50 mA/point OMRON DRT2-ID32B-1.
Unit power supply current consumption: 230 mA max.
(for 20.4 to 26.4-VDC power supply voltage)
e-CON Connector insertion durability: 50 times.
Weight: 220 g max.
Expansion functions: No.
Short-circuit protection function: Available.
(Operates at 50 mA/point min.)
Easy wiring using industry standard,
e-CON connectors OMRON Board Terminals with MIL Connector.
Special wiring tool is not necessary.
Digital I/O terminal with industry,
standard e-CON connectors OMRON Board Terminals with MIL Connector.
A common terminal is provided for,
each connector.
The I/O terminal and the sensors can,
be connected directly.
Input response time can be switched for,
high-speed processing.
Selectable node address setting methods:
setting with rotary,
switch and with tool software OMRON Board Terminals with MIL Connector.
When setting the nodes with rotary switch,
setting is easy and node identification,
becomes possible for maintenance. Short/disconnection detection: Supported.
Specifications: Inputs, NPN (+ common), 32 points.
I/O connections:: Clamp terminals DRT2-ID32B-1.
Rated internal circuit power supply voltage:
Supplied from communications connector.
Rated I/O power supply voltage: 24 VDC.
Reduced Wiring and Labor on Factory Sites with Screw-less Terminal Wiring.
Screw--less structure eliminates tightening work OMRON DRT2-ID32B-1.
Detachable terminal blocks for easier maintenance.
Single-step wiring by simply inserting pole terminals.