Home
>> Products
>> MITSUBISHI
>> Servo driver/Servo motor
>> Servo accessories
>> MR-J2S accessories
>> MR-J2HBUS1M Encoder cable MITSUBISHI MR-J2HBUS1M
MR-J2HBUS1M Encoder cable MITSUBISHI MR-J2HBUS1M
Brand:
MITSUBISHI
Name: Enclosure
Model: MR-J2HBUS1M
Cable length: 1.0m.
Amplifier CC-Link interface unit cable.
For MR-J2S-11KA (4) MR-J2S-22KA to (4).
Amplifier and CC-Link interface unit using 0.5 m (1.64 ft) or shorter cables.
...More relevant models >>>>
Name: Enclosure
Model: MR-J2HBUS1M
Cable length: 1.0m.
Amplifier CC-Link interface unit cable.
For MR-J2S-11KA (4) MR-J2S-22KA to (4).
Amplifier and CC-Link interface unit using 0.5 m (1.64 ft) or shorter cables.
The length of the line: 30m.
IP level: IP67.
Bending life: standard.
Encoder cable for HF-KP/HF-MP/HF-SP/HF-JP/HC-LP/HC-UP series. Motor series: low inertia, medium capacity.
Using a serial absolute / incremental encoder.
Rated output power: 3.5kw.
Rated speed: 3000rpm.
With the brake: without.
Shaft end: straight shaft MITSUBISHI MR-J2HBUS1M.
Performance comparison of servo motor and stepping motor MR-J2HBUS1M
Stepper motor as an open-loop control system, and modern digital control technology has the essential link.
In the current domestic digital control system, stepping motor is widely used.
With the emergence of digital AC servo system, AC servo motor is more and more used in digital control system.
In order to adapt to the development trend of digital control, most of the motion control system adopts stepping motor or full digital AC servo motor as executive motor MITSUBISHI MR-J2HBUS1M.
Although they are similar in control mode (pulse train and directional signal), there are great differences in performance and application.
The use performance of the two are compared. MITSUBISHI general purpose AC servo amplifier MR-J2 series.
Rated output: 3 MITSUBISHI MR-J2HBUS1M. 5kw.
Interface: general purpose interface.
Voltage: three phase AC200V.
MITSUBISHI servo system in the MITSUBISHI servo amplifier is widely used,
It can not only be used in the high precision position control and speed control of the working machinery and general industrial machinery,
Can also be used in the field of speed control and tension control MITSUBISHI Encoder cable.
By installing a personal computer with a servo setting software, the parameters setting, trial run, state display, and gain adjustment are performed MITSUBISHI Encoder cable.
MITSUBISHI servo system MR-J2S column is developed on the basis of the servo MR-J2 series with a higher performance and more features of the MITSUBISHI servo system,
The control modes are position control, speed control and torque control, as well as the switching control mode among them MITSUBISHI Encoder cable. Motor: HA-SH type.
Power: 2.0kw.
Speed: 3000r/min.
The speed regulating motor can be divided into a constant speed motor, a stepless constant speed motor, a stepless speed changing motor and a stepless speed cchanging motor,
Can also be divided into electromagnetic induction motor, DC motor, PWM variable frequency motor and switched reluctance motor MR-J2HBUS1M.
The rotor speed of the induction motor is always slightly lower than that of the rrotating magnetic field MITSUBISHI MR-J2HBUS1M.
The rotor speed of the synchronous motor is not independent of the load size, but is always maintained as a synchronous speed.
IP level: IP67.
Bending life: standard.
Encoder cable for HF-KP/HF-MP/HF-SP/HF-JP/HC-LP/HC-UP series. Motor series: low inertia, medium capacity.
Using a serial absolute / incremental encoder.
Rated output power: 3.5kw.
Rated speed: 3000rpm.
With the brake: without.
Shaft end: straight shaft MITSUBISHI MR-J2HBUS1M.
Performance comparison of servo motor and stepping motor MR-J2HBUS1M
Stepper motor as an open-loop control system, and modern digital control technology has the essential link.
In the current domestic digital control system, stepping motor is widely used.
With the emergence of digital AC servo system, AC servo motor is more and more used in digital control system.
In order to adapt to the development trend of digital control, most of the motion control system adopts stepping motor or full digital AC servo motor as executive motor MITSUBISHI MR-J2HBUS1M.
Although they are similar in control mode (pulse train and directional signal), there are great differences in performance and application.
The use performance of the two are compared. MITSUBISHI general purpose AC servo amplifier MR-J2 series.
Rated output: 3 MITSUBISHI MR-J2HBUS1M. 5kw.
Interface: general purpose interface.
Voltage: three phase AC200V.
MITSUBISHI servo system in the MITSUBISHI servo amplifier is widely used,
It can not only be used in the high precision position control and speed control of the working machinery and general industrial machinery,
Can also be used in the field of speed control and tension control MITSUBISHI Encoder cable.
By installing a personal computer with a servo setting software, the parameters setting, trial run, state display, and gain adjustment are performed MITSUBISHI Encoder cable.
MITSUBISHI servo system MR-J2S column is developed on the basis of the servo MR-J2 series with a higher performance and more features of the MITSUBISHI servo system,
The control modes are position control, speed control and torque control, as well as the switching control mode among them MITSUBISHI Encoder cable. Motor: HA-SH type.
Power: 2.0kw.
Speed: 3000r/min.
The speed regulating motor can be divided into a constant speed motor, a stepless constant speed motor, a stepless speed changing motor and a stepless speed cchanging motor,
Can also be divided into electromagnetic induction motor, DC motor, PWM variable frequency motor and switched reluctance motor MR-J2HBUS1M.
The rotor speed of the induction motor is always slightly lower than that of the rrotating magnetic field MITSUBISHI MR-J2HBUS1M.
The rotor speed of the synchronous motor is not independent of the load size, but is always maintained as a synchronous speed.
...More relevant models >>>>
Last one: 
next one: Related download