CJ2M-CPU31 PROGRAMMING MANUAL OMRON CJ2M-CPU31 Manual

Unit type: CS1 Special I/O Units.
Name: High speed Counter Units.
Specifications: Countable channels,
2; Encoder A and B inputs,
pulse input Z signals, Open collector,
Input voltage: 5VDC,12VDC, or 24VDC,
(up to 2 axes for 5 V or 12 V input),
RS-422 line driver;
Max. counting rate, 50kHz, 500kHz OMRON CJ2M-CPU31 Manual.
No. of unit numbers allocated: 4.
Current consumption: 5V, 0.45A; 26V, -- CJ2M-CPU31
Standards: UC, N, L, CE.
High-Speed, Flexible Control With A,
Wide Array of Features.
Equipped with 2 or 4 Counters and counts,
over a maximum binary range of 32-bits.
Accepting input pulse frequencies of up,
to 500 kHz allows precise control of fast motions.
The Unit is equipped with 4 Digital Inputs,
4 Digital Outputs and 28 Soft Outputs OMRON CJ2M-CPU31 Manual.
A maximum response time of 0.5 ms guarantees,
high-speed closed loop control of applications. Communications protocol: Dedicated CompoBus/S protoco.
Code: Manchester code.Model: C200HW-ME16K.
Capacity: 16K words.Unit type: CS1 Special I/O Units.
Product name: Isolated-type,
2-Wire Transmitter Input Unit.
Input points : 4 inputs.
Signal range: 4 to 20 mA, 1 to 5 V OMRON CJ2M-CPU31 Manual.
Conversion speed (resolution):
100ms/4 inputs.
Externa connection: Removable erminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.15A; 26V, 0.16A.
Standards: UC1, CE.
Provides the functionality of isolators,
power supplies, signal converters,
and other devices.
The Analog Input Unit converts analog,
input signals such as 1 to 5 V or 4 to 20mA,
into digital values, and takes the values,
scaled in industrial units, and transfers,
it to the CPU Unit as the process value.
Because of this, no ladder program is required,
at the CPU Unit for scaling.
The Analog Output Unit converts analog output set,
values from the CPU Unit to analog output signals,
such as 4 to 20 mA or 1 to 5 V, and outputs them.
The built-in functions, such as measurement value,
alarms, rate-of-change calculations, and square roots,
have enabled major savings in cost and space comparedd,
with previous systems CJ2M-CPU31 PROGRAMMING MANUAL.
High-resolution Models and 8-point Input Models are,
also available.
By combining the Units, logging/monitoring.
systems can be constructed,
or the Units can be used together with LCBs/LCCUs,
to construct complete process control systems CJ2M-CPU31 PROGRAMMING MANUAL.
Parameters can be easily displayed and set in an,
easy-to-understand form without special tools.