LK Automation Limited
Home >> Download >> OMRON >> Manual Download >> CP1L-M60DT-D REFERENCE MANUAL OMRON CP1L-M60DT-D Communications Commands Manual

CP1L-M60DT-D REFERENCE MANUAL OMRON CP1L-M60DT-D Communications Commands Manual

Product model: CP1L-M60DT-D
Name: PLC
Brand: OMRON
Sort: Communications Commands REFERENCE MANUAL
File language: English
File size: 2.74MB
Name: Cam Positioner Module.
Model: C200H-CP114.
Output points: 48 points (16 external output points, 32 internal output points).
External outputs: NPN transistor open collector (withphoto-coupler insulation)
Switching capacity: 100 mA at 24 VDC Simultaneous ONO. OF I/O SLOTS: 3 SLOTSName: Two-tier Screw Terminal Block OMRON CP1L-M60DT-D Manual.
Specifications: Outputs; 16 outputs; PNP.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CP1L-M60DT-D
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site OMRON CP1L-M60DT-D Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 4 inputs ; 2 outputs.
Signal range selection:
Set separately for each input and output.
Signal range, Resolution: 1 to 5 V,
0 to 5 V, 0 to 10 V, -10 to 10 V,
4 to 20 mA OMRON CP1L-M60DT-D Manual.
Resolution: 1/4,000 (Settable to 1/8,000).
Conversion period: 1 ms/point,
(Settable to 500 μs/point).
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F.S. Current: ±0.2% of F.S;
Voltage: ±0.3% of F.S. Current: ±0.3% of F.S.
External connection: Removable terminal block.
External power supply: 24 VDC +10% -15%, 140mA max.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.58A; 24V, --.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data.
Analog Output Units for converting binary ,
data into analog output signals. Name: e-CON Connectors.
Specifications: Outputs; 32 outputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reducced CP1L-M60DT-D REFERENCE MANUAL.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on sitee CP1L-M60DT-D REFERENCE MANUAL.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error.
Related products
OMRON
CP1L CPU Unit
CP1L-M60DR-D
OMRON CP1L CPU Unit CP1L-M60DR-D
CPU Unit: CP1L-M CPU Units with 60 Points. S
OMRON
CP1L CPU Unit
CP1L-M60DT1-D
OMRON CP1L CPU Unit CP1L-M60DT1-D
CPU Unit: CP1L-M CPU Units with 60 Points. S
OMRON
CP1L CPU Unit
CP1L-M60DT-D
OMRON CP1L CPU Unit CP1L-M60DT-D
CPU Unit: CP1L-M CPU Units with 60 Points. S
OMRON
CP1L CPU Unit
CP1L-M30DR-D
OMRON CP1L CPU Unit CP1L-M30DR-D
CPU Unit: CP1L-M CPU Units with 30 Points. S