CPU Q00JCPU-SET Application Functions Manual MITSUBISHI Q00JCPU-SET Strctured Programming Manual

8 slots; requires 1 AnS series PLC power modules;
Used to install large AnS series PLC module.
Base plate of AnS series PLC.
QA1S series PLC 8 slot main substrate.
AnS series of modules can be installed. BASIC program execution module.
RS-232.
2 channel.
Ultra high speed processing, production time is shortened, better performance Q00JCPU-SET Manual.
As applications become larger and more complex, it is necessary to shorten the system operation cycle time Q00JCPU-SET
The operation period can be shortened by the super high basic operation speed 1.9ns.
In addition to achieve in the past with the control of single-chip high-speed control,
The system performance can be improved by reducing the total scan time,
To prevent any possible performance bias Q00JCPU-SET Manual.
The position signal of the first axis servo amplifier, which is used on the motion CPU, is used as a trigger,
Starting from the programmable controller CPU to the second axis servo amplifier,
Time to output speed command of servo amplifier.
This time is the index of data transmission speed between CPU.High performance type CPU, process CPU, memory card protection cover for redundant CPU Q00JCPU-SET Manual.
Q3MEM-4MBS-SET bundled products."Input: 2 channels.
200/100/10kpps.
Counter input signal: DC5/12/24V.
External input: DC5/12/24V.
Uniform output: Transistor (drain type).
DC12/24V.
0.1A/ point.
0.4A/ common end.
40 pin connector.
Support high resolution devices. Pulse input and high speed counter module product group satisfying high speed and high precision control application MITSUBISHI Q00JCPU-SET Strctured Programming Manual.
High speed counter module for counting high-speed pulse train MITSUBISHI Q00JCPU-SET Strctured Programming Manual.
Can be used in combination with the external encoder for positioning and other control.
The maximum count rate can be switched, and the low frequency pulse is counted from the high speed pulse to the rising edge / falling edge.
Each 1 channel is equipped with 2 points of external uniform output MITSUBISHI Q00JCPU-SET Strctured Programming Manual.
Can be selected according to the use of "consistent output function", "continuous comparison function", to achieve high-speed control of external equipment. (QD64D2)
Provides a variety of functions, such as the same output test function (using a continuous comparison function), the default function, the latch counter fuunction,
In order to meet the needs of various applications Q00JCPU-SET Application Functions. (QD64D2)
The maximum count rate of the input pulse can be up to 8Mpps (differential input, 2 phase, 4 double frequency).
Can be in the semiconductor, liquid crystal manuufacturing and other high position accuracy requirements of the equipment,
Perform accurate position tracking using high resolution encoders Q00JCPU-SET Manual. (QD65PD2)"