CRT1-ID16SY Manual OMRON remote terminals CRT1-ID16SY UL Standards and CSA Standards

Model: CPM2C-TS001. 2 inputs for thermocouples Unit type: CJ1 Special I/O Units.
Product name: Analog Input Unit.
I/O points: 8 inputs;
Signal range selection: 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 to 10 V, 4 to 20mA;
1/4,000(Settable to 1/8,000)*2 .
Conversion period: 1 ms/point,
(250 μs/point can also be set OMRON remote terminals UL Standards and CSA Standards. )*2.
Accuracy at ambient temperature of 25°C:
Voltage: ±0 CRT1-ID16SY2% of F. S. Current: ±0.4% of F.S.
External connection: Removable terminal block.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.42A; 24V, --.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data OMRON remote terminals UL Standards and CSA Standards.
Analog Output Units for converting binary ,
data into analog output signals. C500-AD/3G2A5-AD Special I/O Unit Analog Input C500-AD001(3G2A5-AD001).
Input: 2 pts.
Specification: +1~+5V, 4~20mA.Name: e-CON Connectors.
Specifications: Inputs; 32 inputs; PNP;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet OMRON remote terminals UL Standards and CSA Standards.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CRT1-ID16SY UL Standards and CSA Standards.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CRT1-ID16SY UL Standards and CSA Standards. Includes a Fuzzy Training System Manual,
a Main Unit, a C200H-MR831 Memory Unit,
a C200H-PRO27-E Programming Console,
a C200H-CN222 Cable for the Programming Console,
C500-SU981-E Fuzzy Training Software,
an RS-232C Cable, and a carrying belt CRT1-ID16SY UL Standards and CSA Standards. Specifications: Without clock (see below).Unit type: CJ1 Special I/O Units.
Product name: Analog Input Unit.
I/O points: 4 inputs;
Signal range selection: 1 to 5 V, 0 to 5 V,
0 to 10 V, -10 to 10 V, 4 to 20mA;
1/4,000(Settable to 1/8,000)*2 .
Conversion period: 1 ms/point,
(250 μs/point can also be set.)*2.
Accuracy at ambient temperature of 25°C:
Voltage: ±0.2% of F. S. Current: ±0.4% of F.S.
External connection: Removable terminal block.
Noo CRT1-ID16SY Manual. of unit numbers allocated: 1.
Current consumption: 5V, 0.42A; 24V, --.
Standards: UC1, N, L, CE.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Anaalog Input Units for converting analog input,
signals into binary data OMRON remote terminals UL Standards and CSA Standards.
Analog Output Units for converting binary ,
data into analog output signals.