D4N-8A2GR INSTRUCTION sheet OMRON D4N-8A2GR Manual

Type: 1-Conduit (High pull-force type).
Contact configuration: Slow-action; 2NC/1NO.
Conduit opening/Connector: G1/2.
Multi-contact, Labor-saving,
Environment-friendly, Next,
generation Safety-door Switch.
Lineup includes three contact models with 2NC/1NO,
and 3NC contact forms and MBB models in addition,
to the previous contact forms 1NC/1NO, and 2NC OMRON D4N-8A2GR Manual.
M12-connector models are available, saving on,
labor and simplifying replacement D4N-8A2GR
Standardized gold-clad contacts provide high,
contact reliability.
Applicable to both standard loads and microloads.
Variety of metallic heads available. Highly Reliable Rotary-action.
Switch for Low Torque.
Operation (0.5 mN·m ).
0.5A rated model employs crossbar gold-alloy OMRON D4N-8A2GR Manual.
contacts for excellent contact reliability in the micro load range.
Long durability (10,000,000 mechanical operations,
min.) through use of a movable coil spring. Actuator: Cat whisker.
Conduit size: 1-conduit; M20.
Built-in switch mechanism: 2NC (Slow-action).
Popular Safety Limit Switches.
Providing a Full Lineup Conforming to,
International Standards.
Lineup includes models with 1NC/1NO, 2NC, 2NC/1NO and,
3NC contact forms OMRON D4N-8A2GR Manual.
(Slow-action models with MBB contacts are available.)
M12-connector models are also available, saving on labor and,
simplifying replacement.
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115-1, EN81-1, and EN81-2 (slow-action models only).
Certified standards: UL, EN (TÜV), and CCC.
Ratings: 1 A at 30 VDC.
LED indicator: With indicator.
Actuator: Roller plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating).
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Type: Welding / wire type, with left column.
Drive rod: R blade Shibai rod type.
Terminal specifications: with wire, the right side of the lead.
Contact specifications: 1a. D4N-8A2GR INSTRUCTION sheet.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment.
No swing bars are also used ffor easy long stroke specifications (OT reference value: 1 D4N-8A2GR INSTRUCTION sheet. 4mm).
Without harmful substances to the environment, the lead type has also been lead-free.