DRT2-MD32B-1 Manual OMRON remote i/o terminal DRT2-MD32B-1 INSTRUCTION Manual

Type: 1-Conduit (High pull-force type).
Contact configuration: Slow-action; 1NC/1NO.
Conduit opening/Connector: M20.
Multi-contact, Labor-saving,
Environment-friendly, Next,
generation Safety-door Switch.
Lineup includes three contact models with 2NC/1NO,
and 3NC contact forms and MBB models in addition,
to the previous contact forms 1NC/1NO, and 2NC OMRON remote i/o terminal INSTRUCTION Manual DRT2-MD32B-1
M12-connector models are available, saving on,
labor and simplifying replacement.
Standardized gold-clad contacts provide high,
contact reliability.
Applicable to both standard loads and microloads.
Variety of metallic heads available. Receptacle box: G 1/2 Conduit.
Indicator: With LED indicator (DC).
Actuator: Side plunger, Vertical roller OMRON remote i/o terminal INSTRUCTION Manual.
The Limit Switch with Better Seal,
Shock Resistance, and Strength.
A double seal on the head, a complete gasket cover, and,
other features ensure a better seal (meets UL NEMA 3, 4, 4X, 6P, 12, 13).
Wide standard operating temperature range:
-40°C to +100°C (standard type).
Models with fluoro-rubber available for greater resistance to chemicals.
Block mounting method also reduces downtime for maintenance OMRON remote i/o terminal INSTRUCTION Manual.
DPDT, double-break models available for complex operations.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved model DRT2-MD32B-1 INSTRUCTION Manual. ) Contact type: Silver plated.
Terminal specification: left corner terminal.
Straight terminal: needle shaped button type.
Super small (6 DRT2-MD32B-1 INSTRUCTION Manual. 5 x 8.2 x width depth of high quality 2.7mm) only 0.3g speed switch
Although it is super small, but with fast moving structure, good electrical characteristics.
Contact with gold plated contacts for silver plated contacts and small loads.
Can be used in small audio equipment, optical equipment, communication equipment, etc DRT2-MD32B-1 INSTRUCTION Manual. .
A place of high demand and high reliability. Specifications: Input, NPN (+ common), 16 points.
I/O connections: Sensor I/O connector.
Rated internal circuit power supply voltage:
Supplied from the communications connector.
Rated I/O power supply voltage: Supplied from the communications connector.
Environment-resistive (IP67) I/O.
Terminals with Troubleshooting.
Functions such as Sensor Power.
Supply Short-circuit Detection.
Equipped with the standard Smart Slave functions that provide powerful,
preventative maintenance and troubleshooting capabilities.
High degree of enviroonmental resistance with dust-proof,
and drip-proofconstruction DRT2-MD32B-1 Manual.
Power supply wiring is not required for input devices.
Connect heavy-load devices (up to 1.5 A).
Power supply wiring is not required forr input devices such as sensors OMRON remote i/o terminal INSTRUCTION Manual.
(Power supply wiring is required for output devices.)
Detects ground faults or disconnects and notifies the Master.