E3X-HD__-2 Series Manual OMRON smart fiber sensor E3X-HD__-2 Series INSTRUCTION sheet

E32-D15ZR type: standard type; soft (new standard),
Specialty: the plane shape of head,
Bending radius (mm): R; R1.
Standard test object (minimum test object) (mm) 1: (0.005),
Fiber element for meeting diversified needsSlit width: Width 1 × 10 mm.
Installation procedure: Plug-in type.
Applicable type: E3Z-T@@ OMRON smart fiber sensor INSTRUCTION sheet. Size: 1/8 DIN 48 × 96 × 78(W × H × D).
Power supply voltage: 24 VAC/VDC E3X-HD__-2 Series
Input type: Thermocouple or Resistance thermometer.
Alarm output: 3.
Control output: Voltage output(for driving SSR) .
Functions: Heater burnout, No; Mounting option units, Yes.
Previous model: None.
These Best-selling General,
purpose Temperature Controllers,
Are Now Even Better.
Controllers now available with analog inputs OMRON smart fiber sensor INSTRUCTION sheet.
Faster sampling at 250 ms.
Transfer output provided for easy output to recorders.
Models available with a loop break alarm (LBA) and,
heater short alarm (HS alarm).
Manual output provided.
Easy setting with 11-segment displays.
New protocol called Modbus is installed in the,
models with communications.
USB-Serial conversion cable is available.
Note: Refer to Precautions on page 33 OMRON smart fiber sensor INSTRUCTION sheet. Appearance: Shielded, M18.
Sensing distance: 4 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor E3X-HD__-2 Series INSTRUCTION sheet.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available E3X-HD__-2 Series INSTRUCTION sheet. Choose red, green light source of the 2 models.
Can detect a variety of colors.
Detection mode: diffuse reflection type.
Shape: vertical.
Connection mode: lead wire.
Detection distance: green light 12mm positive and negative 2mm.
Output mode: open collector output type, NPN output E3X-HD__-2 Series INSTRUCTION sheet. Sensing method: Diffuse-reflective.
Connection method: Standard M8 connector.
Sensing distance: 1m.
Model: PNP output .
The Standard for Photoelectric Sensors,
with a Secure TTrack Record of One,
Million Sold Yearly E3X-HD__-2 Series Manual.
Long sensing distance of 30 m for Through-beam Models, 4 m for,
Retro-reflective Models, and 1 m for Diffuse-reflective Models.
Mechanical axis and optical axiss offset of less than ±2 OMRON smart fiber sensor INSTRUCTION sheet. 5° simplifies,
optical axis adjustment.
High stability with unique algorithm that prevents interference of,
external light.