GT1585-STBA Manual MITSUBISHI GT1585-STBA Gateway Functions Manual

RS-232 serial communication unit (D-sub9 pin (header).
Applicable models: GT15, GT16, GT27, GT25. Cable length: 30m.
For long distance connections between QCPU and GOT (above 13.2M) (need A9GT-QCNB).
Long distance connection between two GOT.
Applicable models: GT16, GT15, GT11, GT27, GT25. Cable length: 1m MITSUBISHI GT1585-STBA Gateway Functions Manual.
The connection between the FXCPU (MINI-DIN8 pin connector) and the graphic operation terminal GT1585-STBA
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT.
Applicable models: GT10, GT21. Protective film for 5.7 inch screen.
Scrub (frame: white), 5.
Applicable model: GT105. Cable length: 3.0m.
For the connection between QnAS/AnSCPU/ motion controller A7GT-CNB (A Series) and CPU MITSUBISHI GT1585-STBA Gateway Functions Manual.
Applicable models: GT16, GT15, GT11. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 10.4 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: DC24V MITSUBISHI GT1585-STBA Gateway Functions Manual.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system.
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT1585-STBA Manual . Cable length: 10.6m.
Long distance connection betwween CPU (A Series) and GOT for QnAS/AnSCPU/ motion controller GT1585-STBA Manual .
Long distance connection between A7GT-CNB and GOT.
Applicable models: GT16, GT15, GT11.