LK Automation Limited
Home >> Download >> MITSUBISHI >> Manual Download >> Graphic Operation Terminal A985GOT-TBA-G Hardware Manual MITSUBISHI A985GOT-TBA-G User's Manual

Graphic Operation Terminal A985GOT-TBA-G Hardware Manual MITSUBISHI A985GOT-TBA-G User's Manual

Product model: A985GOT-TBA-G
Name: Graphic Operation Terminal
Brand: MITSUBISHI
Sort: Hardware User's Manual
File language: English
File size: 0.67MB
Output type: transistor output, drain type.
Output points: 8 points.
OFF leakage current: 0.25mA.
Output protection function.
Rated load voltage / current: DC12V/DC24V/0.5A.
External connection: 1 wire.
According to the external connection mode and the external equipment input and output specifications,
Choose from a rich product lineup A985GOT-TBA-G Manual.
Finger protection through the upper part of the terminal,
The human body will not be exposed to live parts,
Therefore, the terminal station type remote I/O module can be directly mounted to the machine tool A985GOT-TBA-G Input voltage range: AC100 ~ 120V.
Output voltage: DC24V.
Output current: 0.6A.
Relay output interface circuit of PLC
Working process: when the internal circuit output digital signal 1,
There is a current flowing through, the relay coil has a current, and then the normally open contact is closed,
Provide load current and voltage A985GOT-TBA-G Manual.
When the internal circuit outputs a digital signal 0, there is no current flowing through it,
The relay coil does not have a current, and the normally open contact is broken off,
A current or voltage that is disconnected from the load A985GOT-TBA-G Manual.
It is through the output interface circuit to the internal digital circuit into a signal to make the load action or not action.
I/O points is an important indicator of PLC.
Reasonable selection of I/O points can not only satisfy the control requirements of the system,
And the total investment of the system is the lowest MITSUBISHI A985GOT-TBA-G User's Manual.
The input and output points and types of PLC should be determined according to the analog quantity and switch quantity of the controlled object,
Generally an input / output element to take up an input / output point MITSUBISHI A985GOT-TBA-G User's Manual.
Taking into account the future adjustment and expansion,
In general should be estimated on the total number of points plus the amount of spare 20%~30% MITSUBISHI A985GOT-TBA-G User's Manual.
The following describes the centralized control system I/O points of the estimate. Output points: 16 points.
Voltage: DC24V/AC240V, 2A/1 point, 8A/1 public end.
OFF leakage current: 0.1mA.
Output type: relay output.
Response time: 12ms.
8 point /1 a public side.
20 point terminal station.
With the surge absorber.
CE certification.
The number of I/O thyristor DC motor control required tube DC motor speed control system is the main form of DC speed regulation,
The thyristor rectifier unit is used to supply power to the DC motor.
PLC control of the DC drive system, the input of the PLC in addition to the main signal outside the signal,
We need to consider the switching signal, the fault signal transmission device, brake signal and fan fault signal.
The output of the PLC mainly consider the speed command signal positive 1~3 level, 1~3 level, allowing reverse switching signal and brake open signal etc..
In general, a reversible DC drive system controlled by PLC is approximately 12 input points and 8 output points,
An irreversible DC drive system requires 9 inputs and 6 output points.
MITSUBISHI PLC is the main product in the production of MITSUBISHI motor in Dalian.
It uses a kind of programmable memory for its internal storage procedures,
Execute logic operation, sequence control, timing, counting and arithmetic operations, user oriented instruction,
And through digital or analog input / output control of various types of machinery or production process.
Control solenoid valve required I/O points by the action principle of the solenoid valve can be known,,
A single coil solenoid valve with PLC control to 2 input and 1 output,
A double coil solenoid valve requires 3 inputs and 2 outputs,
A button needs an input; a light sensitive switch needs 4 or 2 inputs,
A signal lamp needs 1 output, band switch,
Several bands are required for several inputs,
In general, a variety of position switches are required to take up 2 input points A985GOT-TBA-G Manual A985GOT-TBA-G Hardware.
Related products
MITSUBISHI
12 inch man machine interface
A985GOT-TBD
MITSUBISHI 12 inch man machine interface A985GOT-TBD
Series Name: A985GOT. Size: 12 inches. Resolu
MITSUBISHI
12 inch man machine interface
A985GOT-TBD-V
MITSUBISHI 12 inch man machine interface A985GOT-TBD-V
Series Name: A985GOT-V. Size: 12 inches. Reso
MITSUBISHI
12 inch man machine interface
A985GOT-TBA
MITSUBISHI 12 inch man machine interface A985GOT-TBA
Series Name: A985GOT. Size: 12 inches. Resolu
MITSUBISHI
12 inch man machine interface
A985GOT-TBA-EU
MITSUBISHI 12 inch man machine interface A985GOT-TBA-EU
Series Name: A985GOT. Size: 12 inches. Resolu