HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC)

Motor: HA-LH type.
Power: 22kw.
Speed: 2000r/min.
According to the types of power supply: can be divided into DC motor and AC motor.
The structure and working principle of DC motor can be divided into four parts: brushless DC motor and brushless DC motor.
Brushless DC motor can be divided into: permanent magnet DC motor and DC motor HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC).
DC Motor Division: Series DC motor, DC motor, DC motor and DC motor HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC)
Permanent magnet DC Motor Division: rare earth permanent magnet DC motor, ferrite permanent magnet DC motor and aluminum nickel Gu Yongci DC motor. Type: HA-SE series.
Rated output: 3.5KW.
Rated speed: 2000r/min.
Electromagnetic brake: there.
Control complex, easy to achieve intelligent,
The electronic commutation method is flexible and can be changed by square wave or sine wave HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC).
Motor maintenance free, high efficiency, low operating temperature,
Electromagnetic radiation is very small, long life, can be used in a variety of environments.
AC servo motor is brushless motor, which is divided into synchronous and asynchronous motor,
Synchronous machines are commonly used in motion control,
Its power range, you can do a lot of power HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC).
Large inertia, the maximum rotation speed is low, and with the increase of power and rapid reduction.
So it is suitable for the application of low speed and stable operation.
The rotor of the servo motor is permanent magnet,
Drive controlled U/V/W three phase electric electromagnetic field,
The rotor rotates under the action of the magnetic field,
At the same time the motor comes with the encoder feedback signal to the drive,
According to the feedback value and the target value, the driver is compared,
Adjust the rotor rotation angle.
The accuracy of the servo motor is determined by the accuracy of the encoder. Motor series: low inertia, medium power.
Rated output power: 37.0kw.
Rated speed: 1500r/min.
Whether to take the brake: No.
Shaft end: Standard (straight).
Voltage: 400V type.
Protection level: IP65 (IP67).
Features: low inertia from low speed to high speed, three modes can be selected, suitable for different application range. As a standard port, 30KW or greater power is suitable for flange (type) installation and support foot mounting.

Application example: injection molding machine, semiconductor manufacturing equipment, large conveyor machinery HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC).
High resolution encoder 131072p/rev (17 bit).
The encoder with high reesolution ensures excellent performance and stability at low speed HMI 800 Series Connection Manual(MELSEC-FX Series and Omrom PLC).
All motor dimensions are the same as before and all are compatible with the wiring.