LK Automation Limited
Home >> Download >> MITSUBISHI >> Manual Download >> I/O MODULE AJ35PJ-8D User's Manual MITSUBISHI AJ35PJ-8D Manual

I/O MODULE AJ35PJ-8D User's Manual MITSUBISHI AJ35PJ-8D Manual

Product model: AJ35PJ-8D
Name: I/O MODULE
Brand: MITSUBISHI
Sort: User's Manual
File language: English
File size: 6.99MB
A pack of 10.
Applicable models:
AJ65VBTS - - - type.
AJ65VBTCE - - - type.
AJ65VBTCU - - - type.
AJ65ABTP - - - type.
AJ65VBCU- - type.
AJ65SBT-CLB type.
Can only use FANC-110SBH, CS-110, FA-CBL200PSBH. Screw, 2 piece type terminal
Thermocouple Input module.
Number of channels: 4 channels.
Number of stations: 1 stops AJ35PJ-8D User's Manual.
Station type: remote equipment station.
MITSUBISHI PLC online debugging AJ35PJ-8D
On-line debugging is the process that will through the simulation debugging to further carry on the on-line unification to adjust.
On-line debugging process should be step by step,
From MITSUBISHI PLC only connected to the input device, and then connect the output device, and then connect to the actual load and so on and so on step by step AJ35PJ-8D User's Manual.
If you do not meet the requirements, the hardware and procedures for adjustment.
Usually only need to modify the part of the program can be.
MITSUBISHI PLC hardware implementation
Hardware implementation is mainly for the control cabinet and other hardware design and field construction.
Design control cabinet and the operating table and other parts of the electrical wiring diagram and wiring diagram AJ35PJ-8D User's Manual.
Electrical interconnection diagram of each part of the design system.
According to the construction drawings of the site wiring, and carry out a detailed inspection.
Because the program design and hardware implementation can be carried out at the same time,
So the design cycle of the MITSUBISHI PLC control system can be greatly reduced MITSUBISHI AJ35PJ-8D Manual MITSUBISHI AJ35PJ-8D Manual . Number of channels: 2 channels.
Sensing method and temperature range: PT100.
A1S64TC series component is a kind of temperature controller combined with ANS series CPU.
Components with temperature measurement input and built-in PID algorithm control output, can be used in a variety of temperature control occasions MITSUBISHI AJ35PJ-8D Manual .
Each component controls up to 4 loops at most.
Thermocouple input or PT100 3 wire temperature sensor input.
Control output switching signal for the output of the transistor.
BW is a signal with broken line detection function. Cable length: 30 meters.
PC to GOT long distance connection cable.
For connection between GOT and GOT. SRAM PC card.
Applicable models: A95_GOT (-M3) /A956WGOT. "8 channels.
Input: DC-10 ~ 10V.
Output (resolution): -4000 ~ 4000/-8000 ~ 8000/-12000 ~ 12000.
Transform speed: 40ms/8 channel.
38 point terminal station.
Input status and input information input from the input interface,
CPU will be stored in the working data memory or in the input image register.
And then combine the data and the program with CPU.
The result is stored in the output image register or the working data memory,
And then output to the output interface, control the external drive.
PLC selection with the development of PLC technology, more and more types of PLC products,
Function is becoming more and more perfect, and its application is more and more extensive.
Different series of different models of PLC has different performance, applicable occasions also have different emphasis,
Price also has a greater difference. Therefore PLC selection,
Under the premise of meeting the control requirements,
Should consider the best performance to price ratio, a reasonable choice of PLC.
The working process of the input interface circuit: when the switch is closed, the diode light,
The transistor is then guided to the internal circuit and input signal under the irradiation of the light.
When the switch is off, the diode does not emit light, and the transistor is not on the way. Internal circuit input signal.
It is through the input interface circuit to the external switch signal into PLC internal can accept the digital signal.
MITSSUBISHI PLC is the main product in the production of MITSUBISHI motor in Dalian AJ35PJ-8D .
It uses a kind of programmable memory for its internal storage procedures,
Execute logic operation, sequence control, timing, counting and arithhmetic operations, user oriented instruction,
And through digital or analog input / output control of various types of machinery or production process AJ35PJ-8D User's Manual.
Related products
MITSUBISHI
Melsecnet module
AJ35TT-BU
MITSUBISHI Melsecnet module AJ35TT-BU
Transmission line unit for MELSECNET/MINI -S
MITSUBISHI
AC input / relay output module
AJ35TB1-16AR
MITSUBISHI AC input / relay output module AJ35TB1-16AR
AC input points: 8 points. Input voltage and
MITSUBISHI
DC input module
AJ35TB3-8D
MITSUBISHI DC input module AJ35TB3-8D
DC input points: 8 points. Input voltage and
MITSUBISHI
DC input module
AJ35TB1-16D
MITSUBISHI DC input module AJ35TB1-16D
DC input points: 16 points. Input voltage and