INVERTER FR-A720-55K Applied INSTRUCTION MANUAL MITSUBISHI FR-A720-55K Manual

Extension board for connection with special adapters
(FX1S and FX1N host general). MITSUBISHI inverter series: FR-F840.
Voltage level: three phase 400V.
Power: 220kw.
SLD converter rated current: 481A.
Structure and function: Standard model.
Type: CA.
Substrate coating: have.
The motor efficiency is not changed in the previous optimal excitation control,
At the same time, the newly developed advanced optimal excitation control can obtain larger torque at startup FR-A720-55K INSTRUCTION MANUAL FR-A720-55K
No need to adjust the parameters (plus deceleration time or torque, etc.), in a short time to speed up to a certain speed,
Can be carried out to maximize the efficiency of energy-saving drive motor.
The automatic tuning function of the loop constant of the motor is not consistent with the constant of the motor, the motor of other manufacturers, and the length of wiring is too long,
Optimum operating characteristic drive motor FR-A720-55K INSTRUCTION MANUAL.
In the state of the sensor can not only drive the high efficiency and energy saving motor and PM motor (MM-EFS), but also can drive other companies induction motor and PM motor (permanent magnet synchronous motor) FR-A720-55K INSTRUCTION MANUAL.
Other manufacturers of induction motors, can also be automatically tuned to achieve the best excitation control, thus expanding the use of energy saving. Can be isolated from the output of the programmable controller, the a/b/c contact relay, SSR, Tr output MITSUBISHI FR-A720-55K Manual. Analog input points: 4 points (type PT100 sensor).
Rated temperature range: -100~600 degree MITSUBISHI FR-A720-55K Manual.
Effective digital output: -1000~6000.
Resolution: 0.2~0.3 degree.
Weight: 0.1kg.
Dimensions: 17.6 x 90 x 89.5.
Analog quantity input adapter for platinum temperature measuring resistor (PT100 3 wire) temperature sensor.
FX3U-4AD-PTW-ADP through 4 channels, can measure the degree of -100~600.
No programming to send data to FX3 series MITSUBISHI FR-A720-55K Manual.
Connect FX3SA, FX3S, FX3GA, FX3G, FX3U,
Need to convert adapter or function extension board. Power: 7.5kw.
Voltage: 400V.
There are 100% braking torque output in continuous reegeneration, which can correspond to the continuous regeneration operation of the pipeline control FR-A720-55K Applied.
There is no need to install the braking unit for each frequency converter, which can reduce the comprehensive space annd reduce the comprehensive cost FR-A720-55K INSTRUCTION MANUAL.
Renewable energy can be used for other frequency converter, excess energy back to the grid, to achieve energy saving.