INVERTER FR-A840-12120-2-60 DETAILED Instruction manual MITSUBISHI FR-A840-12120-2-60 Manual

Convert connector to screw relay terminal.
According to the location of the connection equipment distribution module. Positive common end use. Input output cable for A6TBXY36 type connector / terminal row conversion module.
Length 5M. Power: 280kw.
Voltage: 400V.
Purpose: high frequency braking resistor FR-A840-12120-2-60 Instruction manual.
The braking ability provided by the braking capacity is larger than that provided by the external braking resistor FR-A840-12120-2-60
Can also be connected without built-in brake transistor inverter.
Three types of discharge resistors are available.
Please select according to the required braking torque. MITSUBISHI inverter FR-F720 series.
Voltage level: three phase 200V.
Frequency converter capacity: 0.75KW FR-A840-12120-2-60 Instruction manual.
When the inverter is running, the starting current and starting torque of the motor are how?
With the operation of the inverter, with the acceleration of the motor to improve the frequency and voltage,
The starting current is limited to 150% below the rated current (according to the different types of aircraft, 125%~200%).
Starting with power frequency power supply, the starting current is 6~7 times of the rated current, therefore, the impact on the mechanical and electrical FR-A840-12120-2-60 Instruction manual.
The inverter drive can be smoothly start (start time longer).
The starting current is 1.2~1.5 times of the rated current, and the starting torque is 70%~120% rated torque;
For the inverter with the torque automatic enhancement function, the starting torque is more than 100%, which can start with full load MITSUBISHI FR-A840-12120-2-60 Manual MITSUBISHI FR-A840-12120-2-60 Manual . Max input / output points: 10 points.
Supply voltage: 100 - 240VAC.
Input points: 6 points.
Output points: 4 points.
Output type: Transistor (source).
Power consumption (W): 6.
Weight (kg):0.22.
Size (WxHxD) mm:60x90x49.
Host has 10 points (6I/4O), 14 points (8I/6O), 20 points (12I/8O), 30 points (16I/14O) of 4 types MITSUBISHI FR-A840-12120-2-60 Manual .
This type of PLC is mainly used in all of the digital input, digital output control point of the device.
Can be directly connected to the 220V city power, built-in 8K step EEPROM memory, no battery, easy to maiintain FR-A840-12120-2-60 DETAILED.
The series transistor output (MT) of the PLC, can be output 2 100KHz pulse, direct drive servo or stepper motor.
The series PLC can not be brought with the expansion module, but can be installed by the BBD board to extend a small amount of I/O FR-A840-12120-2-60 Instruction manual.
The series 1N through the installation of BD series PLC board, can achieve RS232, RS485, RS422 communication.