MITSUBISHI FX1S-14MR-DS Manual FX1S-14MR-DS PROGRAMMING MANUAL II

Length: 3m.
Specification: D-sub 25 pin (male), D-sub 25 pin (male). Total input and output points: 40 points.
Input points: 24 points.
Output points: 16 points.
Output type: transistor output.
Power supply voltage: AC100-240V.
Input signal voltage: DC24V.
8K capacity of the RAM memory, the maximum can be extended to 16K FX1S-14MR-DS PROGRAMMING MANUAL II.
CPU arithmetic processing speed of 0.08 S/ basic instructions FX1S-14MR-DS
On the right side of the FX2N series can be connected to the input and output expansion modules and special function modules.
The basic unit is built in the 2 axis independent maximum 20kHz positioning function (transistor output type).
Quick disconnect the terminal block, which adopts excellent maintainability to quickly disconnect the terminal blocks, even if the cable is then replaced by the cable FX1S-14MR-DS PROGRAMMING MANUAL II.
Clock function and hour meter function, all of the PLC FX2N has a real-time clock standard.
Continuous scanning function, to define the operation cycle for the application of the continuous scan time.
Input filter adjustment function, you can use the input filter to smooth the input signal (in the basic unit x000 to x017) FX1S-14MR-DS PROGRAMMING MANUAL II.
Note recording function, Component annotation can be recorded in the program register.
Online program editor, online change the program will not lose the working hours or stop production operation.
RUN/STOP switch, running on panel / stop switch easy to operate.
Remote maintenance, remote programming software can monitor, upload or uninstall programs and data via modem communications
Password protection, using a eight digit password to protect your program. Built in CC-LINK/LT master function PLC.
From the scene of the complex wiring operations, such as the liberation of false wiring,
FX3UC basic unit standard, distribution network CC-LINK/LT.
The I/O module can be easily controlled by using only the FX3UC basic unit.
The input and output of the program is automatically assigned to the remote I/O station I/O,
So it doesn''t need complicated parameter setting.
Has the same function as the CC-LINK/LT master station module.
By installing the high speed, high performance PLC and CC-LINK/LT masster function organically combined together to achieve a superior price FX1S-14MR-DS Manual.
FX3UC basic single built in the network with the power 0.35A.
For the less number of remote I/O, there is no external power adapter, can also be connected tto the FX1S-14MR-DS Manual.
Input and output maximum 256 points.
For the extension of the device connected to the basic unit, the total up to 256 points can be controlled.