MITSUBISHI GT1155-QSBD-C Connection Manual touch screen Manual

Protective film for 8.4 inch screen.
Scrub (frame: white), 5.
Applicable model: GT16. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600) GT1155-QSBD-C Manual .
Display device: TFT color (high brightness, wide viewing angle) GT1155-QSBD-C
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system GT1155-QSBD-C Manual .
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly GT1155-QSBD-C Manual MITSUBISHI touch screen Manual . 4GB flash ROM.
Applicable models: GT16, HandyGOTCable length: 1.2m.
For the connection between QnAS/AnSCPU/ motion controller GOT (A Series) and CPU MITSUBISHI touch screen Manual .
Applicable models: GT16, GT15, GT11. For the GT1665M-VTB.
Applicable model: GT16. 2GB flash ROM.
Applicable models: GT16, GT15, GT11, HandyGOTProtective film for 5.7 inch screen (for HandyGOT).
Scrub (frame: white), 5.
Applicable model: used for hand held GOT GT11 MITSUBISHI touch screen Manual . 12.1 inches.
Surface treatment: transparent.
Protective film color: No.
USB protective cover parts: no openingss GT1155-QSBD-C Connection Manual.
Set number: 5.
Applicable model: GT21. Cable length: 3 meters.
QnACPU GOT.
RS-422 conversion (FA-CNV / CBL) cable GOT.
The serial communication module GOT.
The peripheral machine connection module (AJ65BT-G4-S3) GOT.
[D-sub 25 pin loose line (row 5 pin interface terminal)] GT1155-QSBD-C Manual .
GT2103-PMBD does not support Q00JCPU, Q00CPU, CPU Q01CPU direct connection.
Applicable model: GT21.