MITSUBISHI GT2103-PMBDS Connection Manual GRAPHIC OPERATION TERMINAL Non-Mitsubishi Products 1 Manual

Protective film for 5.7 inch screen.
Scrub (frame: white), 5.
Applicable model: GT14. Support network: DP PROFIBUS, DeviceNet.
Applicable models: GT27, GT25. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color GT2103-PMBDS Manual .
Mounting type: panel mounting type.
Resolution: SVGA (800 x 600) GT2103-PMBDS
Display device: TFT color (high brightness, wide viewing angle).
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment.
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port GT2103-PMBDS Manual .
Standard RS-232 interface.
Support video /RGB unit.
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system GT2103-PMBDS Manual .
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly MITSUBISHI GRAPHIC OPERATION TERMINAL Manual . Protective film for 5.7 inch screen (for HandyGOT) MITSUBISHI GRAPHIC OPERATION TERMINAL Manual .
Scrub (frame: white), 5.
Applicable model: used for hand held GOT GT11. Protective film for 5.7 inch screen.
Scrub (frame: white), 5.
Applicable model: GT105. Series introduction: set a number of basic functions in a small body model.
Screen size: 3.7 inches.
Display color: monochrome MITSUBISHI GRAPHIC OPERATION TERMINAL Manual .
Mounting type: panel mounting type.
Resolution: 288 * 96.
Display device: STN monochrome.
Host frame color: black.
Power type: DC24V.
Communication interface: with built-in RS-232.
Set a number of basic functions in a compact type.
GT1055/GT1050/GT1045/GT1040:
User storage capacity: 3MB.
Device USB port.
The standard RS-422/485 and RS-232 interface.
GT1030/GT1020:
User storage capacity: 1.5MB (gt1030) /512kb (gt1020).
Three color LED backlight design, equipment status at a glance.
The standard RS-422/485 or RS-232 interface.
Touch screen, also known as touch screen, touch panel, is a kind of induction type liiquid crystal display device can receive contacts and other input signals,
When touching the screen button on the screen,
The tactile feedback system on the screen can drive various connecting devices according to the pre prograammed program,
Can be used to replace the mechanical button panel, and by the liquid crystal display screen to create the image of the effect of birth GT2103-PMBDS Manual GT2103-PMBDS Connection Manual.