OMRON D4N-4B2HR INSTRUCTION sheet

Actuator: One-way roller arm lever (horizontal).
Conduit size: 1-conduit; M12 connector.
Built-in switch mechanism: 2NC (Slow-action).
A Series of Pull-reset Models Now.
Available.
Lineup includes three contact models with 2NC/1NO and 3NC,
contact forms in addition to the previous contact forms 1NC/1NO and 2NC D4N-4B2HR .
M12-connector models are available, saving on labor and,
simplifying replacement D4N-4B2HR
Standardized gold-clad contacts provide high contact reliability.
Can be used with both standard loads and microloads.
Conforms to EN115, EN81-1 and EN81-2.
Certified standards: UL, EN (TÜV), and CCC. Measurement range: 4 mm.
Resolution: 0.4 µm.
Operating force: Approx. 0.7 N.
Five Types of Sensor for Use in a Wide D4N-4B2HR .
Range of Environments.
D5SN-S01/-S04/-S04-L Sensors have a compact and light,
weight design with an ultra-small diameter of 6 mm.
The D5SN-S01 offers a high resolution of 0.1 µm.
D5SN-M05/-M10 Sensors have a robust construction and can,
withstand a horizontal load of 5 N.
D5SN-S01/-S04/-M05/-M10 Sensors ensure IP67 degree of,
protection.
All Sensors have an insulated design D4N-4B2HR . Actuator: Roller lever (resin roller).
Conduit openings: M20.
2NC (Slow-action).
Robust safety limit switch with metal housing.
Slow-action and snap-action contact with,
certified direct opening operation certification.
Direct opening mechanism (NC contacts only) added to,
enable opening contacts when faults occur, such as fused contacts.
Safety of lever settings ensured using a mechanism that,
engages a gear between the operating position indicator plate and the lever.
Equipped with a mechanism that indicates the applicable,
operating zone, as well as push-button switching to control left and right motion.
Head seal structure strengthened to improve seal properties.
(TÜV: IEC IP67, UL: NEMA 3, 4, 4X, 6P, and 13).
Wide standard operating temperature range: –40 to 80°C (standard type).
Certified standards: UL, CSA, EN (TÜV), and CCC.
Contact type: Silver plated.
Terminal specification: right angle terminal.
Straight terminal: needle shaped button type.
Super small (6.5 x 88 D4N-4B2HR INSTRUCTION sheet. 2 x width depth of high quality 2.7mm) only 0.3g speed switch
Although it is super small, but with fast moving structure, good electrical characteristics.
Contact with gold plated contacts for silver plated contacts aand small loads D4N-4B2HR INSTRUCTION sheet.
Can be used in small audio equipment, optical equipment, communication equipment, etc..
A place of high demand and high reliability.