LK Automation Limited
Home >> Download >> OMRON >> Manual Download >> OMRON D4NH-1BAS Manual D4NH-1BAS INSTRUCTION sheet

OMRON D4NH-1BAS Manual D4NH-1BAS INSTRUCTION sheet

Product model: D4NH-1BAS
Name: safety-door hinge switch
Brand: OMRON
Sort: INSTRUCTION sheet
File language: English
File size: 0.47MB
Actuator: Roller lever (Metal lever, resin roller).
Cable length: 1 m.
Pull-outing direction of cable: Horizontal.
Built-in switch: 4NC (slow-action).
Smallest Class of Safety Limit Switches the World.
The world''s smallest limit switch with a direct opening,
mechanism (four-contact construction model) D4NH-1BAS INSTRUCTION sheet.
High-sensitivity safety limit switch.
Built-in switches with two- or four-contact construction are available D4NH-1BAS
Degree of protection: IP67.
Conforms to EN115-1, EN81-1 and EN81-2.
(slow-action models only).
Certified standards: UL, EN (TÜV), and CCC. Type: 1-Conduit (High pull-force type).
Contact configuration: Slow-action; 2NC.
Conduit opening/Connector: M20.
Multi-contact, Labor-saving,
Environment-friendly, Next,
generation Safety-door Switch D4NH-1BAS INSTRUCTION sheet.
Lineup includes three contact models with 2NC/1NO,
and 3NC contact forms and MBB models in addition,
to the previous contact forms 1NC/1NO, and 2NC.
M12-connector models are available, saving on,
labor and simplifying replacement.
Standardized gold-clad contacts provide high,
contact reliability.
Applicable to both standard loads and microloads D4NH-1BAS INSTRUCTION sheet.
Variety of metallic heads available. Release Key Type: Standard (metal).
Wiring method: Terminal block.
Solenoid voltage/Indicator: 24VDC (Orange).
Lock and release type: Mechanical lock Solenoid release.
Contact configuration (door open/closed detection switch,
and lock monitor switch contacts): 5-contact Model,
Insert the built-in switch (E, F, G or H) into the blank @.
Conduit size (See Note.): 1/2-14NPT.
World''s smallest Class 6-contact Guard Lock.
Safety-door Switch.
.
Wiring time is reduced with two types of wiring.
methods capable of one-touch attachment and removal.
A wide variety of built-in switches can be used for various devices.
(4-, 5-, and 6-contact models are available).
Key holding force of 1,300 N.
It is possible to change the key inssertion point D4NH-1BAS Manual.
without detaching the head.
Drive solenoids directly from the Controller.
.
Lockout Key to prevent workers from becoming.
trapped inside the hazardous area.
The vertical D4SL Guard Lockk Safety-door Switch,
can be easily mounted on 40 × 40 mm aluminum frames D4NH-1BAS Manual.
The plastic material makes the Slide Key suitable,
for lightweight doors.
Related products
OMRON
Safety-door Hinge Switch
D4NH-2BAS
OMRON Safety-door Hinge Switch D4NH-2BAS
Actuator: Shaft. Conduit size: 1-conduit G1
OMRON
Safety-door Hinge Switch
D4NH-4FAS
OMRON Safety-door Hinge Switch D4NH-4FAS
Actuator: Shaft. Conduit size: 1-conduit M2
OMRON
Safety-door Hinge Switch
D4NH-6CBC
OMRON Safety-door Hinge Switch D4NH-6CBC
Actuator: Arm lever. Conduit size: 2-conduit
OMRON
Safety-door Hinge Switch
D4NH-6BBC
OMRON Safety-door Hinge Switch D4NH-6BBC
Actuator: Arm lever. Conduit size: 2-conduit