OMRON H5CN-XANM INSTRUCTION MANUAL H5CN-XANM Manual

Type: no instantaneous contact.
Terminal configuration type: special terminal configuration.
Pin type: 8 pin.
Action mode / reset mode: time limit action / auto reset.
Output mode: contact output.
Installation method: embedded installation / front mounting.
1 units can be in 0.5 seconds to 120 seconds, select the 4 time range H5CN-XANM INSTRUCTION MANUAL.
Achieved UL, CSA, NK, LR certification, in compliance with EN61812-1 H5CN-XANM
Conform to the CE mark, CCC. Supply voltage: 24, 100 to 120, 200 to 230 VAC;
12, 24, 48, 100 to 110, 125 VDC.
Time-limit contact: 4PDT.
Short-time range model (0.1 s to 10 min).
Miniature Timer with Multiple Time.
Ranges and Multiple Operating Modes.
Minimizes stock.
Pin configuration compatible with MY Power Relay H5CN-XANM INSTRUCTION MANUAL.
Standard multiple operating modes and multiple time ranges.
Conforms to EN 61812-1 and IEC 60664-1 for Low Voltage,
and EMC Directives. Supply voltage: 24 to 240 VAC/DC.
Control output: Contact output, SPDT (time-limit SPDT).
Four-mode Timer.
Multiple time ranges and operating modes let you cover a wide,
range of applications.
The time-limit DPDT output contacts can be changed to time-limit,
SPDT and instantaneous SPDT output contacts using a switch H5CN-XANM INSTRUCTION MANUAL.
Sequence checks are easily performed by setting an instanta,
neous output to 0.
Start signal control for the H3DK-M. Weekly Control with a Large Time Display,
Easy Programming with Large Display and Interactive,
Functions.
Easy operation with five keys.
Up to 24 steps of ON/OFF operations can be set.
Power supply freely selectable from 100 to 240 VAC.
Memory protection during power failure for up to 10 years.
Certified for UL and CSA safety standards.
The same setting can be used for multiple-day operation and,
timer operation. Operating modes: Flicker ON start.
Supply voltage: 100 to 240 VAC/100 to 125 VDC, 24 to 48 VAC/12 to 48 VDC.
0.05 s to 300 h models: 8-pin models.
DIN 48 × 48-mm Twin Timers.
Wide power supply ranges of High Voltage 100 to 240 VAC/100,
to 125 VDC and Low Voltage 24 to 48 VAC/12 to 48 VDC.
ON- and OFF-times can be set independently and so,
combinations of long ON- or OFF-time and short OFF- or ON,
time settings are possible H5CN-XANM Manual.
Twenty-four time ranges from 0.05 s to 300 h depending on the,
model to be used.
Models with a flicker ON start or flicker OFF start are available.
Easy sequence checks through instantaneous outputs for a,
zero set value at any time range H5CN-XANM Manual.
Length, when panel-mounted with a Socket, of 80 mm or less.
11-pin and 8-pin models are available.