OMRON ZX-TDS01T Operation Manual Smart Sensors Manual

Actuator: Sealed (Booted); Sealed plunger; AC.
Mounting: Diagonal side mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity ZX-TDS01T Manual.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches ZX-TDS01T DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with ground terminals have CE marking.
Approved by UL, CSA, and CCC (Chinese standard) ZX-TDS01T Manual.
(Ask your OMRON representative for information on approved models.)Optical system: Through-beam.
Measuring width: 30 mm.
Sensing distance: 0 to 500 mm.
Resolution: 12 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Power supply voltage: DC24V.
Control output: NPN output. Nozzle gap ZX-TDS01T Manual.
Optical system: positive and negative radiation.
Detection distance: 10 positive and negative 0.5mm.
Beam shape: linear beam.
Beam diameter: 900mm * 25 M.
Resolution: 0.25 M.
Cable length: 0.5m. Easy temperature and humidity control with an SD Card OMRON Smart Sensors Manual. Classification: High-sensitivity.
Contact gap: H (0.25 mm).
Actuator: Hinge lever; Low OP.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety OMRON Smart Sensors Manual.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available OMRON Smart Sensors Manual. The temperature, humidity and differential pressure of the cleaning chamber and thee simple cleaning room by using PC,
Power consumption and other manufacturing environment ZX-TDS01T Operation Manual.
Implement unified management software.
Centralized management of environmental information in the production site.
Real time analysis of meassurement data ZX-TDS01T Manual.
Installation site and measurement conditions can be understood through the map.
Can only be converted to the required data format Excel.