PLC CP1L-L20DR-D Communications Commands REFERENCE MANUAL OMRON CP1L-L20DR-D Manual

Connects to the I/O module located on the extreme right.Model: C500-CN331.
Cable length: 30 m.
Programming Console Connecting Cable.
For extension and connection of FIT of FIT.
Model: C200H-ID217.
No. of points: 32 pts.
Specifications: 24 VDC.
Weight: 250g max.Power supply voltage: 100 to 240VAC CP1L-L20DR-D REFERENCE MANUAL.
Output capacity: 5-VDC output capacity, 2.8A;
24-VDC output capacity, 0 CP1L-L20DR-D4A;
Total power consumption, 14w.
Options: 24-VDC service power supply, No;
RUN output, No; Maintenance forecast monitor, No.
Standards: UC1, N, L, CE.
Equipped with the RUN output for,
checking the operation status,
as well as the replacement.
notification function for easy,
maintenance.
Lineup of five models including the,
AC power supply (25W) CP1L-L20DR-D REFERENCE MANUAL.
Stable power supply is available from the,
CJ-series CPU Unit to each I/O Units via the,
dedicated bus. The most suitable Power Supply,
Unit can be selected among various I/O ,
specifications and/or options. Model: CPM2C-32CDTM-D. CPU Unit: Units with 32 I/O points.
2 MIL connectors.
Inputs: 16 inputs.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sinking transistor CP1L-L20DR-D REFERENCE MANUAL.
Internal clock: --.I/O Cable (for Rack I/O to Backplane) 0.6 m (L) CV500-CN613Model : C500-LK201-EV1.
RS-232C/RS-422.C200H-CPU21-E CPUs
High Spec, Small Rack Style
The C200H-CPU21-E and C200H-CPU23-E controllers offer increased I/O capacity and the same basic functionality as the OEM versions OMRON CP1L-L20DR-D Manual. In addition,
these controllers offer an extended instruction set,
expansion OMRON CP1L-L20DR-D Manual. A variety of CPUs are available with various memory and I/O configurations allowing selection based on application requirements.C500-OA I/O Unit Triac Output 16 pts C500-OA121(3G2A5-OA121).
AC132V 1A.Model: C200HW-ME04K.
Capacity: 4K words.C500-AD/3G2A5-AD Special I/O Unit Analog Input C500-AD003(3G2A5-AD003) OMRON CP1L-L20DR-D Manual.
Input: 2 pts.
Specification: 0~+5V.Provided with a 2-m cable for ladder programming.One Ethernet Optionn Board can be mounted in either option board slot 1 or 2 CP1L-L20DR-D Communications Commands.
Note: Cannot be used for the CP1L-L10.4 platinum resistance thermometer inputs Applicable CPU Units: CQM1H-CPU51/61.
Connection location and number of Units: OOne Unit only CP1L-L20DR-D REFERENCE MANUAL. The Unit must be connected between the Power Supply Unit and the CPU Unit.
Dimensions: 25 × 110 × 107 mm (W × H × D).
Weight: 170 g max.