PLC MELSEC-QnA Certificate of TYPE APPROVAL MITSUBISHI MELSEC-QnA Certificate

Cable length: 0.5mSuperior high efficiency IPM motor.
Output power: 18kw.
Rated speed: 1500r/min.
Voltage level: 200V.
IPM motor MM-EFS series can not be used to run the power frequency power.
The total wiring length of the IPM motor shall not exceed 100m.
1 inverters can not connect multiple IPM motors at the same time MELSEC-QnA Certificate of TYPE APPROVAL. 1 axis servo amplifier.
MITSUBISHI general AC servo amplifier MELSERVO-J4 series MELSEC-QnA
Rated output: 0.6kw.
Interface: General purpose.
Power supply: three phase AC200V.
Servo amplifier supporting universal interface.
Servo amplifier for universal interface.
Speed / torque control of position control and analog voltage command can be carried out by using pulse train command.
Support Max instruction pulse frequency 4 Mpulses/s MELSEC-QnA Certificate of TYPE APPROVAL.
2 low frequency vibration can be suppressed at the same time by supporting the seismic algorithm of 3 inertial equipment.
Configurator2 MR to achieve convenient adjustment.
Effectively restrain the low frequency aftershock effect produced by the front end of the boom or the main body of the device 100Hz.
Can effectively shorten the time to control the stability of the aftershock MELSEC-QnA Certificate of TYPE APPROVAL.
In the XY design of trajectory control, improve the accuracy of arc track.
At the same time, it can effectively control the phenomenon of quadrant protrusion caused by the rotation direction of the servo motor, which is caused by friction and twisting MITSUBISHI MELSEC-QnA Certificate. MITSUBISHI motor universal AC servo amplifier MELSERVO-J3 series.
Rated output: 22 MITSUBISHI MELSEC-QnA Certificate. 0kw.
Interface type: SSCNET type III fiber communication.
Special features: integrated driver security.
Power specification: three phase AC400V.
STO function as a security feature is added to the SSCNET III fiber communication type servo amplifier.
By using the STO function, the electromagnetic contactor used in the past to prevent the motor from accidentally starting is no longer needed MITSUBISHI MELSEC-QnA Certificate.
SS1 functions can be realized by using the MR-J3-D05 security logic unit.
MR-J3-BS uses a full closed loop control system.
Compatibility with MR-J3-B.
MR-J3-BS installation, wiring andd connectors are the same as the MR-J3-B, so do not change the existing connection will be easy to MR-J3-B
Change to MR-J3-BS MELSEC-QnA .
Security functions are connected to the CN8 interface through an external securityy circuit to increase the MR-J3-BS driver security MELSEC-QnA Certificate of TYPE APPROVAL.
Compatible full closed loop control system.
MR-J3-BS has a full closed loop control system version.