PLC Q172DCPU-S1 Common Instructions Programming Manual MITSUBISHI Q172DCPU-S1 Manual

AC input: 32 points.
Rated current and voltage: AC100 ~ 120V, 10mA (AC100V, 60Hz).
Response time: 25ms.
Input form: 1 points, 32 public ends.
External wiring connections: 38 terminals (terminals sold separately).
Replacement model: AX11.Input and output points: 1024 points.
Input / output data points: 8192 points Q172DCPU-S1 Programming Manual.
Program capacity: 60k.
Basic command processing speed (LD command) S:0 Q172DCPU-S12.
PLC in the program execution stage: according to the order of the user program order to store the order of each instruction,
After the corresponding operation and processing, the result is written to the output status register,
The contents of the output status register are changed with the execution of the program Q172DCPU-S1 Programming Manual.
Output refresh phase: when all instructions are executed,
The output status register is sent to the output latch in the output refresh stage,
And through a certain way (relay, transistor or transistor) output, drive the corresponding output equipment. SRAM+E2PROM memory card.
RAM capacity: 64KB.
E2PROM capacity: 64KB. Empty cover plate for I/O groove.Input: 2 channels.
4Mpps.
Counter input signal: EIA standard RS-422-A (differential linear drive) Q172DCPU-S1 Programming Manual.
External input: DC24V.
Uniform output: Transistor (drain type).
DC12/24V.
0.5A/ point.
2A/ common end.
40 pin connector.
Support high resolution devices. Pulse input and high speed counter module product group satisfying high speed and high precision control application MITSUBISHI Q172DCPU-S1 Manual.
High speed counter module for counting high-speed pulse train MITSUBISHI Q172DCPU-S1 Manual.
Can be used in combination with the external encoder for positioning and other control.
The maximum count rate can be switched, and the low frequency pulse is counted from the high speed pulse to the rising edge / falling edge.
Each 1 channel is equipped with 2 points of external uniform output MITSUBISHI Q172DCPU-S1 Manual.
Can be selected according to the use of "consistent output function", "continuous comparison function", to achieve high-speed control of external equipment. (QD64D2)
Provides a variety of functions, such as the same output test function (using a continuous comparison function), the default function, the latch counter function,
In order to meet the needs of various applications Q172DCPU-S1 Common Instructions. (QD64D2)
The maximum count rate of the input pulse can be up to 8Mpps (differential input, 2 phase, 4 double frequency).
Can be in the semiconductor, liquid crystal mannufacturing and other high position accuracy requirements of the equipment,
Perform accurate position tracking using high resolution encoders Q172DCPU-S1 Programming Manual. (QD65PD2)