guard lock safety-door switch D4SL-N4PFG-D Manual OMRON D4SL-N4PFG-D INSTRUCTION sheet

Ratings: 1 A at 125 VAC.
LED indicator: Without indicator.
Actuator: Pin plunger.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever models that enable ganged mounting.
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection D4SL-N4PFG-D Manual.
Operation indicators available for easy monitoring,
(standard indicator is lit when Switch is not operating) D4SL-N4PFG-D
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.) Type: Welding / wire type, with right column.
Drive rod: leaf Shibai rod type.
Terminal specifications: with wire, under the lead D4SL-N4PFG-D Manual.
Contact specifications: 1a.
The minimum size of the long stroke type can be reliably switch
The body part size is 78% of the previous generation product, which is beneficial to the miniaturization of the equipment.
No swing bars are also used for easy long stroke specifications (OT reference value: 1.4mm).
Without harmful substances to the environment, the lead type has also been lead-free D4SL-N4PFG-D Manual. Ratings: 3 A.
Actuator: Pin plunger.
Terminals: Solder terminals.
Contact form: SPDT.
Sealed Subminiature Basic.
Switch Conforming to IP67.
(Excluding the terminals on terminal models).
Use of epoxy resin assures stable sealing,
making this switch ideal for places subject to,
water spray or excessive dust OMRON D4SL-N4PFG-D INSTRUCTION sheet.
Ideal for automobiles, automatic vending,
machines, refrigerators, ice-making equipment,
bath equipment, hot-water supply systems, air,
conditioners, and industrial equipments, which,
require high environmental resistance OMRON D4SL-N4PFG-D INSTRUCTION sheet.
Models available with UL, CSA, and VDE safety,
standard compliance. Ratings: 1 A at 30 VDC.
LED indicator: With indicator.
Actuator: High-sensitivity roller lever OMRON D4SL-N4PFG-D INSTRUCTION sheet.
Many Models Including Roller Lever.
Switches are Only 16-mm Thick with Connector.
New center roller lever mmodels that enable ganged mounting D4SL-N4PFG-D .
of up to 6 Switches.
Cable connectors for easy Switch replacement.
Triple-seal construction to provide IEC IP67 degree of protection.
Operation indicators available for easy monitoring,
((standard indicator is lit when Switch is not operating) D4SL-N4PFG-D Manual.
Approved by UL and CSA.
(Ask your OMRON representative for Information on approved models.)