solid-state timer H3CR-AP Manual OMRON H3CR-AP INSTRUCTION MANUAL

Supply voltage: 24 VAC; 12, 24 VDC.
Time-limit contact: SPDT.
Short-time range model (0.1 s to 10 min).
Ultra-slim Timer for G2R Relay Socket.
Pin configuration compatible with G2R Relay and mounts to the,
P2R/P2RF Socket.
Standard multiple time ranges and multiple operating modes.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Volt,
age, and EMC Directives H3CR-AP Manual. Output: DPDT H3CR-AP
Supply voltage: 110 VAC (50/60 Hz); 220 VAC (50/60 Hz).
Timer: S-series; M-series.
Long power OFF-delay times;
S-series: up to 12 seconds,
M-series: up to 12 minutes.
Setting rings (order separately) to enable consistent,
settings and to limit the setting range.
Panel Covers (order separately) to enable various panel designs H3CR-AP Manual.
Approved by UL, CSA, CE and CCC. Preset stage: 1-stage setting.
Nameplate lettering: Japanese.
Nine Built-in Counters/Timers to.
Measure Equipment Operating.
Cycles and Times and Forecast.
Maintenance Timing.
Provides up to nine counters or accumulative timers.
(Counter and timer functions can be used at the same time.)
Individual forecast outputs to indicate maintenance timing H3CR-AP Manual.
Pre-forecast display and machine stoppage output provided.
IP54 oil-proof type at setting area for resistance to oil and water.
Separate digit keys to easily change settings.
Compact, short-body: 72 × 72 × 79 mm (DIN).
Key protection function prevents incorrect operation OMRON H3CR-AP INSTRUCTION MANUAL.
Multiple outputs: NPN/PNP.
Directly connectable to 2-wire DC sensors.
Complies with UL and CSA. Rated supply voltage: 100 to 240 VAC OMRON H3CR-AP INSTRUCTION MANUAL.
Resetting system (See note.): Electric resetting.
Control output: DPDT contact output,
(Time-limit output SPDT and instantaneous output SPDT).
Time range: 1 s to 60 h (60 s, 6 min, 60 min, 6 h, 60 h).
Large Setting Dial and Moving Pointers Ideal,
for Easy Operation and Monitoring OMRON H3CR-AP INSTRUCTION MANUAL.
Incorporating an easy-to-see large setting dial with moving pointers.
Wide time-setting range of 0.2 s to 60 h.
(available through three time-range model types).
Wide AC power supply range (100 to 240 VAC).
IP65 watertight and dust-tight front panel.
Approved by UL and CSA.
Conforms to EN61812-1 and IEC60664-1.
4 kV for Low Voltagge, and EMC Directives H3CR-AP .
Conforms to EMC standards.
Six-language instruction manual provided.
Programmable contact enables the building of a self-holding,
relay circuit as well as built-in instantaneous contact. (-NS).
Memory reteention (-NSR) H3CR-AP Manual.
Finger protection terminal block.
Enables easy sequence checks through instantaneous outputs.
for a zero set value at any time range.