touch screen GT1575-VNBA Extended/Option Functions Manual MITSUBISHI GT1575-VNBA Manual

Cable length: 10m.
The connection between the FXCPU (MINI-DIN8 pin connector) and the graphic operation terminal.
Connection between FXCPU communication function extension board (MINI-DIN8 pin connector) and GOT.
Applicable models: GT10, GT21. Protective film for 10.4 inch screen.
Transparent, 5.
Applicable model: GT16 GT1575-VNBA Extended/Option Functions Manual. 16GB flash ROM.
Applicable models: GT16, HandyGOTGOT2000/1000 series with IE CC-Link field network communication module GT1575-VNBA
GOT communication module supporting IE CC-Link field network.
Can be used as the IE CC-Link field network of intelligent equipment station, to construct the system containing the display.
Support for the GOT model GT27, GT16, GT15. For MES interface functions GT1575-VNBA Extended/Option Functions Manual.
Applicable model: GT16. Cable length: 10m.
Connection between a connector adapter box and a smart GOT.
Applicable model: HandyGOT. A series of high performance models that are widely used in network or single machine work environments.
Screen size: 12.1 inches.
Display color: 256 color or more color.
Installation type: compatible with video /RGB.
Resolution: SVGA (800 x 600).
Display device: TFT color (high brightness, wide viewing angle) GT1575-VNBA Extended/Option Functions Manual.
Host frame color: black.
Power type: AC100~240V.
Communication interface: with built-in RS-422.
Ideal model for high performance in a network or independent operation environment MITSUBISHI GT1575-VNBA Manual .
User storage capacity: 9MB (GT15__-VNB_:5MB).
Device USB port.
Standard RS-232 interface.
Support video /RGB unit MITSUBISHI GT1575-VNBA Manual .
If the capacitive touch screen is in the middle of the operation, the display resolution or display mode of the touch screen is changed again,
Or the refresh rate of the touch screen controller is adjusted by itself, and the cursor and the touch point can not be felt when the cursor is not corresponding to the touch point,
Must be re calibrated to the touch screen system MITSUBISHI GT1575-VNBA Manual .
In order to ensure the normal operation of the touch screen system, in addition to ensure the proper installation of the system software,
Must also remember that in a host do not install two or more than two kinds of touch screen driver,
This will cause the system to run in conflict, so that the touch screen system can not be used properly. Function: high performance and low price in the middle end model.
Picture size: 10.4 inches.
Resolution: VGA.
Display: TFT color.
Panel color: black.
Power type: AC100~240V.
Middle end model of high performance and low price.
GT25 standard supports SD memory card and standard equipped with Ethernet, RS-232, RS-422/485, host/device USB interface.
Even in the log, script, alarm, soft component data transmission, such as high load processing period, but also to achieve smooth operation of the screen.
Connect GOT front USB interface and computer,
Can be through the FA, the GOT machine programming, start and adjust the operation,
Save the trouble of opening the control cabinet and changing the cable.
1, USB interface: device USB machine (Mini-B USB)
Can connect to the computer to transfer data.
2, USB interface: host USB (USB-A)
USB data can be transmitted through the USB memory or read log data, such as the GOT data, but also can be connected to the use of the mouse, keyboard.
3, the extension of the interface
Communication module and optional module can be installed.
4, Etheernet interface
Up to 4 different manufacturers can be connected at the same time
FA machine GT1575-VNBA .
5, RS-232 interface
Can connect all kinds of FA machine, bar code reader, serial printer.
6, RS-422/485 interfface
Can be connected to a variety of FA machines, bar code reader GT1575-VNBA Extended/Option Functions Manual.
7, SD memory card slot
Can save alarm and log data, such as a large number of data.