CJ1W-CLK21-V1 PDF catalog OMRON Controller Link Units CJ1W-CLK21-V1 datasheet PDF datasheet

Model: C200HW-BC101-V1.
No. of I/O slots: 10 slots.C500-AD Special I/O Unit Analog Input C500-AD101.
Input: 8 pts.
Specification: 0~+10V、4~20mA.Name: MIL Connectors.
Specifications: Inputs;
32 inputs ; NPN; --.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet OMRON Controller Link Units PDF datasheet.
Wiring material cost can be reduced CJ1W-CLK21-V1
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON Controller Link Units PDF datasheet. Unit type: CJ1 Special I/O Units.
Product name: Analog Output Unit.
I/O points: 8 outputs;
Signal range selection:
Set separately for each output.
Signal range, Resolution: 4 to 20mA;
1/4,000 (Settable to 1/8,000) *2.
Conversion period: 1 ms/point,
(Settable to 250 μs/point)*2.
Accuracy at ambient temperature of 25°C:
±0.3% of F.S.
External connection: Removable terminal block OMRON Controller Link Units PDF datasheet.
External power supply: 24 VDC +10% -15%, 170mA max.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0.14A; 24V, 0.17*3.
Standards: UC1, N, CE CJ1W-CLK21-V1 PDF datasheet.
Consistent Microsecond Throughput:
Models with Direct Conversion Join the Lineup.
Analog Input Units for converting analog input,
signals into binary data CJ1W-CLK21-V1 PDF datasheet.
Analog Output Units for converting binary ,
data into analog output signals. CV500-CN Cable Bus Connecting Cable Used to join two Hard Disk Units CV500-CN116.C500-RT SYSMAC BUS Remote I/O Master Slave Wired C500-RT002-V1.
PCF.With the optical connector 2Unit type: CJ1 CPU Bus Units CJ1W-CLK21-V1 PDF datasheet.
Product Name: Position Control,
Units with EtherCAT interface.
Specifications: Control output interface,
Control commands executed by,
EtherCAT communications.
Positioning functions: Memory operation,
Direct operation by ladder programming,
I/O communications: 64 nodes;
No. of axes: 4 axes.
No. of unit numbers allocated: 1.
Current conssumption : 5V, 0 CJ1W-CLK21-V1 PDF catalog. 46A; 24V,--.
Standards: UC1, CE.
Preeminent control performance and,
easy operation feature of EtherCAT,
improve the production efficiency.
The EtherCAT communications with,
100Mbps baud rate enables fast,
and accurate position control OMRON Controller Link Units PDF datasheet.
A wide range of position control,
functions are available with,
this position control unit.