OMRON G3PH-5150B DC5-24 PDF datasheet G3PH-5150B DC5-24 datasheet PDF catalog

Contact configuration: Four SPST-NO relays.
Heat sink: Yes.
Built-in SSRs: G3S-201PL-PD.
Zero cross function: No.
Applicable output load: 1 A at 75 to 264 VAC (See note 1.).
Rated voltage: 5 VDC, 12 VDC, 24 VDC.
Compact Terminal SSR with 4 Outputs.
Easy-to-use SSR block that combines four compact G3S SSRs,
sockets, and heat sink in one unit G3PH-5150B DC5-24 PDF datasheet.
Easy wiring with separate I/O terminal construction G3PH-5150B DC5-24
LED operation indicator.
Special socket used for easy Relay replacement.
Mounts either on DIN track or with screws. MITSUBISHI motor produced PLC connection cable.
Size: A, 3000mm; B, 1750mm.
Input use.
Cable and loose wire cable with loose wire pressing connecting terminal,
Connector cable, MITSUBISHI motor produced PLC connection cable G3PH-5150B DC5-24 PDF datasheet. Main contact: 3PST-NO.
Auxiliary contact: None.
Number of input channels: 2 channels.
Rated voltage: 24 VDC.
Less Wiring Required with Safety Light.
Curtain.
Sensor connector allows direct connection to OMRON F3SJ.
Safety Light Curtains with PNP outputs.
Reduces wiring and prevents incorrect connection.
Connection to emergency stop switch also supported G3PH-5150B DC5-24 PDF datasheet.
Conforms to EN standards (TÜV approval).
DIN track mounting possible. Refer to Safety Precautions for All Solid State Relays.
AC Input Unit Enabling AC Operation.
Connects to a maximum of two G3PA-VD Relays. Isolation: Phototriac coupler.
Zero cross function: Yes.
Indicator: Yes.
Rated output load: 20 A at 24 to 240 VAC.
Rated input voltage: 5 to 24 VDC.
Extremely Thin Relays Integrated with Heat Sinks.
Downsizing achieved through optimum design of heat sink.
Mounting possible via screws or via DIN track.
Close mounting possible for linking terminals.
(Except for G3PA-260B-VD and G3PA-450B-VD-2.)
Applicable with 3-phase loads.
Replaceable power element cartridges.
Comply with VDE 0160 (finger protection),
with a dielectric strength of 4,000 V between input and load.

Certified by UL, CSA, and VDE (reinforced insulation) G3PH-5150B DC5-24 PDF catalog. Structure: single stable type.
Contact structure: 1a.
Structure: high flux protection.
Coil rated voltage: DC24V.
Voltage resistant 10kV 1 pole 3A open close ssmall relay G3PH-5150B DC5-24 PDF catalog.
High power electromagnetic loop is used to achieve high sensitivity (200mW).
Small relays, but can ensure the impact resistance of 10kV.