Temperature Monitoring Relay K8AB-TH11S AC/DC24 datasheet PDF catalog OMRON K8AB-TH11S AC/DC24 PDF datasheet

Three-phase Phase-sequence Phase-loss.
Relay Using Voltage Detection Method.
Lineup includes a 17.5-mm slim, compact model.
Greater resistance to inverter noise.
Distinguishes between correct phases, phase sequence, and phase,
loss when power is turned ON.
Supports phase loss detection when the motor is operating K8AB-TH11S AC/DC24 PDF catalog .
Output status can be monitored using LED indicator K8AB-TH11S AC/DC24
Ideal to prevent reverse operation of motors. Setting range: 10 to 100 A AC, 20 to 200 A AC.
Power supply voltage: 24 VAC/DC.
Ideal for Current Monitoring for.
Industrial Facilities and Equipment.
Monitor for overcurrents and undercurrents simultaneously.
Separate settings and outputs supported for overcurrents and undercurrents K8AB-TH11S AC/DC24 PDF catalog .
Use commercially available CTs (CT current on secondary,
side: 0 to 1 A or 0 to 5 A).
Manual resetting and automatically resetting supported by one Relay.
Startup lock and operating time can be set separately.
Two sets of SPDT output contacts, 5 A at 250 VAC (resistive load).
Output status can be monitored using LED indicator.
Inputs are isolated from the power supply. Input type: DC voltage/current K8AB-TH11S AC/DC24 PDF catalog .
Supply voltage: 100 to 240 VAC.
Comparative Output Model: None.
Highly Visible LCD Display with 2-color,
(Red and Green) LEDs.
Multi-range DC voltage/current input.
Front-panel key operation for easy setting.
Average processing function suppresses flicker OMRON K8AB-TH11S AC/DC24 PDF datasheet.
Scaling, front-panel forced-zero, zero-limit functions.
Easy confirmation of max/min display OMRON K8AB-TH11S AC/DC24 PDF datasheet.
Short 80-mm depth (measured from edge of face plate).
Finger protective cover (standard equipment) guards against electric shock.
Water- and dust-proof NEMA4X (IP66 equivalent) front panel.
Recognized to U.S. and Canadian requirements under the Component,
Recognition Program of UL OMRON K8AB-TH11S AC/DC24 PDF datasheet.
CE marking. Input type: DC voltage input type.
Output type: linear; current; NPN open collector (HH, H, PASS, L, LL).
Event input terminal 5 points (TIMING, S-TIM, HOLD, RESET, ZERO) is equipped with.
External supply 80mA DC12V.
Power supply voltage: AC/DC24V.
96 (W) * 48 (H * 95mm) depth
Some models are not equipped with.
The most suitablee voltage and current signal simulation, measurement and display, identification of the panel table K8AB-TH11S AC/DC24 datasheet.
Action determine the color, can switch the green / Red 2 kinds of color display.
Equipped with the sub pressure gaauge for monitoring the operation trend K8AB-TH11S AC/DC24 PDF catalog .
External event input can be applied to a variety of measurement and identification situations.
DeviceNet type