Analog I/O Units GRT1-TBL Manual OMRON GRT1-TBL REFERENCE MANUAL

Insulation method: Photocoupler.
Operation indicator: Yes.
Response speed: High-speed.
Applicable load: 4 to 32 VDC 0.1 to 100 mA.
Input rated voltage: 5 VDC.
SSR with Plug-in Terminals.
The Same Shape as the G2R-1-S.
Power Relays.
These I/O solid state relays can be mounted in OMRON.
G70A I/O Terminals GRT1-TBL Manual.
Lineup includes Input Modules for microloads and Output,
Modules for standard loads GRT1-TBL
Lineup also includes UL, CSA, and TÜV-certified models,
(-UTU models). Type: output module.
Insulation: photo coupler.
Action indicator: there.
Zero trigger function: No.
Applicable load of output: DC48 1A ~ 200V.
Input rated voltage: DC24V.
I/O solid state relay can be used for OMRON I/O type G7TC relay terminal GRT1-TBL Manual.
Input and output composite input module, the output module is complete.
Can be used for I/O type P7TF terminal. Can also be mixed with the I/O type G7T relay.
Can check the working status of SSR through the action indicator.
Have access to UL, CSA standard certification of the series of products have also been series (-US type)Isolation: Photo-voltage coupler.
Zero cross function: No GRT1-TBL Manual.
Indicator: Yes.
Rated output load: 0.5 A at 24 to 240 VAC, 0.5 A at 24 to 110 VDC.
Rated input voltage: 24 VDC.
100-A-max. Leakage Current, No Bleeder.
Resistor Required.
1 mA to 500 mA micro-load switching.
Switch to both AC and DC with no polarity OMRON GRT1-TBL REFERENCE MANUAL.
Switch for a wide range of voltages; 19.2 to 264 VAC, 19.2 to 125 VDC.
Switch full- and half-wave rectifier AC loads OMRON GRT1-TBL REFERENCE MANUAL.
Same sizes and terminal arrangements as OMRON Power,
Relay MY Series.
Operating indicator provided.
Switch MY Series (without bleeder resistor).
Superior surge absorption with a built-in varistor.
Optimum SSR to control minute load, valves, and solenoids. Type: output module.
Insulation mode: three end two-way photoelectric switch OMRON GRT1-TBL REFERENCE MANUAL.
Action indicator: there.
Zero trigger function: No.
Applicable load of output: AC100 2A ~ 240V.
Input rated voltage: DC24V.
I/O solid state relay caan be used for OMRON I/O type G7TC relay terminal GRT1-TBL .
Input and output composite input module, the output module is complete.
Can be used for I/O type P7TF terminal. Can also be mixed with the I/O type G7T relay.
Can check the workinng status of SSR through the action indicator GRT1-TBL Manual.
Have access to UL, CSA standard certification of the series of products have also been series (-US type)