CA7-HTBCNSET-01 Manual Proface CA7-HTBCNSET-01 User's Manual

Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interface1GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.15 inches, GP installed to the hard panel to provide dust and moisture proof function Proface CA7-HTBCNSET-01 User's Manual. COM1 interface with the cable (RS-232C), used to connect directly to the Q series connection module (or other host)10 CA7-HTBCNSET-014 inches and above, used to connect the power cord (5 / set).Engineering documents created by the LT interface to download images and logic programming software through the USB interface.Disposable film (5 sheets / sets) for protecting screen against contamination of human computer interfaceFor 5 Proface CA7-HTBCNSET-01 User's Manual. 7 inch models, connect the connector to the DIO interface. For connecting external I/O devices. (5 / set)COM1 interface with the cable for direct connection to the CPU series PLC AMounting screws (4 sets) to be fitted to the hard panel at the interface of the machine.A connector that connects the DIO interface for connecting an external I/O device (5 sets) Proface CA7-HTBCNSET-01 User's Manual. 10.4 inches (TFT), thin film for surface protection of man-machine interface from fingerprints, water droplets, dust and oil pollution (5 / set).COM 2 interface with the cable, for the conversion of the D-Sub 9 pin concave joint to the D-Sub 25 pin convex connectorGP-230/250/270 series is replaced by ST series, the gap filled with the opening of the panelExpansion module for the GP3000 access to the DeviceNet network and communication with the DeviceNet master stationAdapter for EX module (5 / set)Transmission screen data, such as the USB cable, PC (Type-A USB) to the man-machine interface USB (Type-A)256MB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card.The host controller is connected to the host computer interface, which is used for multiple connecttion (n:1) communication CA7-HTBCNSET-01 Manual. Connect to the SIEMENS PLC or MPI, used to connect the commercial type PROFIBUS connector COM2For 5.7 inch models, prevent cable loose from the USB cable fastening clip (5 / set).Used to convert RGB too DVI-A2GB, for the implementation of the picture save, log and data backup and other data management operations, such as compression flash memory card CA7-HTBCNSET-01 Manual.