CP1E-N60SDT1-D REFERENCE MANUAL OMRON CP1E-N60SDT1-D Manual

CPU Unit: CP1H-XA CPU Units.
Specifications: CPU type, Memory capacity: 20K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Analog inputs: 4, Analog outputs: 2;
Power supply, DC power supply; Output method, Transistor output (sinking);
Inputs, 24; Output, 16 OMRON CP1E-N60SDT1-D Manual.
Standards: UC1, N, L, CE.
4 Axis Position Control and Comprehensive Programmable Controller CP1E-N60SDT1-D
The CP1H-X with pulse outputs for 4 axes.
The CP1H-Y with 1-MHz pulse I/O.
The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O. Specifications: Coaxial cable(5C-2V cable).Name: CS1D CPU Unit for Single CPU Systems.
Specifications: Number of I/O points,
5,120 points (7 Racks);
Program capacity, 250 Ksteps;
Data Memory, 448 Kwords(DM: 32 Kwords,
EM: 32 Kwords×13 banks);
LD execution time, 0 OMRON CP1E-N60SDT1-D Manual. 02 μs;
Duplex CPUs, --;
Interrupt functions, OK.
Current consumption: 5V system, 0.82A;
26V system, --.
Standards: UC1, N, L, CE.
Redundant CPU Units , Power Supply Units ,
Communications Units ,
and Expansion I/O Cables.
Model: C200HW-COM02-V1 OMRON CP1E-N60SDT1-D Manual.
Specifications: One RS-232C port.C500-ID Special I/O Unit ID Sensor Unit General Purpose C500-IDS21.Model : C500-FZ001.
C500-FZ Special I/O Unit Fuzzy Logic Unit C500-FZ001.Model : CV500-IPS01.
Input: 100 to 120/200 to 240 VAC Output: 2A, 24 VDC4 thermocouple inputsConnects Power Supply Adapter and SYSMAC NET Link Unit.
For 2 Unit.Name: Analog I/O Slave Units,
(Numerical indicator type)
e-CON Connector Type.
Specifications: Analog inputs.
(Channel Insulation); 2 inputs.
Standards: CE.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction CP1E-N60SDT1-D REFERENCE MANUAL.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location annd,
content of the error CP1E-N60SDT1-D REFERENCE MANUAL. Model: C500-CN531.
Cable length: 50 m.
Programming Console Connecting Cable.
For extension and connection of FIT of FIT.