CPU Unit ZG2-DSU Manual OMRON ZG2-DSU USER'S MANUAL

Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 0.9A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC.
Ionization time: 1.5 s.
Ion balance: ±10V max.
Amount of ozone generated: 0.01 ppm,
(Measured at a distance of 50 mm from air outlet).
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red) ZG2-DSU Manual.
Main functions: Ion balance adjustment (Automatic and manual) ZG2-DSU
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max., load current: 100mA max.
Residual voltage: 1V max.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0 ZG2-DSU Manual. 1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing).
Ambient humidity range: 35% to 65% (No icing or dewing).
Weight (Packaged): Approx. 0.6 kg (Approx. 1.2 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten.
Accessories: Instruction sheet, I/O connector, L-mounting bracket, Streamer.
This ionizer series is designed to go anywhere.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues ZG2-DSU Manual. Item: Humidity Sensor (3 m).
Easy-to-use and Compact 10-Channel Logger,
with Internal 4 GB Flash Memory. Classification: High-capacity.
Contact gap: E (1 OMRON ZG2-DSU USER'S MANUAL. 8 mm).
Actuator: Short spring plunger.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy OMRON ZG2-DSU USER'S MANUAL.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available OMRON ZG2-DSU USER'S MANUAL. Item: Station.
Easy temperature and humidity control with an SD Card. Coonnection method: Pre-wired ZG2-DSU .
Cable length: 2 m.
Sensing distance: 600 ± 400 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.

Stable measurements for any type of workpiece ZG2-DSU Manual.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.