H8PS-16B Communications Manual OMRON H8PS-16B Manual

DIN Track Mounted, Standard 17.5-mm Width Timer Range.
A wide AC/DC power supply range (24 to 230 VAC/ 24 to 48 VDC) reduces the number, of timer models kept in stock. (24 to 230 VAC/VDC with H3DS-XL@).
Smart Dial/Selector-locking Mechanism: Prevents the dials and selectors on the, Timer’s front panel from being inadvertently op OMRON H8PS-16B Manual.
erated or being operated without authorization H8PS-16B The lock can only be unlocked and, locked with an optional pen-type Lock Key.
Screw-Less Clamp type available. (H3DS-@LC).
Sticker provided for easy timer identification and management.
Terminal clamp left open when delivered (screw terminal type).
Finger protection terminal block to meet VDE0106/P100.
Enables easy sequence checks through instantaneous outputs for a zero,
set value at any time range OMRON H8PS-16B Manual.
Incorporates environment-friendly, cadmium-free contacts.
Conforms to EN61812-1 and IEC60664-1 4 kV/2 for Low Voltage, and EMC Directives. Classification: Preset Counter.
Input signal system (Count & reset inputs): Contact, Transistor.
Mounting method: Flush mounting, surface mounting.
Display: 7-segment LEDs (10 mm high), Up indicator OMRON H8PS-16B Manual.
Number of digits: 4 digits (0 to 9,999).
Backup power for memory protection: No.
Control output: Contact (SPST-NO).
Operating mode: Up counting.
Max.counting speed: 5 kcps (see note 1.).
All Required Counter Functions.
Incorporated in a Compact DIN-sized.
(48 × 48) Housing.
In addition to Up and Down models, a reversible (Up-Down),
counter is also available.
Maximum counting speed of 5,000 cps, never before attained by,
a small-size preset counter.
Power supply freely selectable within a range of 100 to 240 VAC.
Also, power supply for the DC-operated models is selectable,
within a range of 12 to 48 V.
Models with memory backup function against power failure available. Miniature Timer with Multiple Time.
Ranges and Multiple Operating Modes.
Minimizes stock.
Pin configuration compatible with MY Power Relay.
Standard multiple operating modes and multiple time ranges.
Conforms to EN 61812-1 and IEC 60664-1 for Low Voltage,
and EMC Directives. Classification: Preset Counter.
Input signal system (Count & reset inputs): Contact, Transistor.
Mounting method: Flush mounting, surface mounting.
Display: 7-segment LEDs (10 mm high), Up indicator.
Number of digits: 4 digits (0 to 9,999).
Backup power for memory protection: No.
Control output: Contact (SPST-NO).
Operating mode: Reversible counting, command inpu.
Max.counting speed: 30 cps.
All Required Counter Functions.
Incorporated in a Compact DIN-sized.
(48 × 48) Housing.
In addition to Up and Down models, a reveersible (Up-Down),
counter is also available H8PS-16B Communications Manual.
Maximum counting speed of 5,000 cps, never before attained by,
a small-size preset counter.
Power supply freely selectable within a range of 100 to 240 VAC.
Also, poweer supply for the DC-operated models is selectable,
within a range of 12 to 48 V H8PS-16B Communications Manual.
Models with memory backup function against power failure available.