Model: CPM2A-20CDR-A. Power supply: AC power supply.
Output type: Relay.
Inputs points: 12 points.
Outputs points: 8 points.Model : C500-LDP01-V1.
Has 40 instructions (same as a C20P.) Input and output points (16 each.).Model: CPM2C-16ET1C. Units with transistor outputs only.
1 Fujitsu connector.
Outputs: 16 outputs CJ1M-CPU12-ETN Manual.
Input type: 24 VDC.
Output type: sourcing transistor.I/O points: 256 pts
CJ1M-CPU12-ETN
Program capacity(words): 7.2 K.
DM capacity (words): 6 K.
RS-232C port: YES.Name: e-CON Connectors.
Specifications: Outputs; 8 outputs ; NPN;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet CJ1M-CPU12-ETN Manual.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error CJ1M-CPU12-ETN Manual. Model: C500-CN812N.
Cable length 80cm.
CV Series C Series Expansion ← → I / O device CPU Connecting cable(Vertical-wired)Specification: Platinum resistance thermometer input (Pt100, JPt100),
heater burnout alarm,
manual operation,
ON/OFF or advanced PID control,
transistor (PNP) output, 2 loops OMRON CJ1M-CPU12-ETN OPERATION MANUAL. Power supply: AC power supply.
Output method: Transistor output source type OMRON CJ1M-CPU12-ETN OPERATION MANUAL.
Inputs points: 24 points.
Outputs points: 16 points.Type: Counter inputs, pulse outputs.
12 DC inputs: Yes.
Counter inputs: None.
Analog inputs: None.
8 transistor outputs: Yes.
2 pulse outputs: No.
2 analog outputs: No.Specifications: Optical ring (HPCF cable).Model : CV2000-CPU01-EV1 OMRON CJ1M-CPU12-ETN OPERATION MANUAL.
SFC / Ladder 2, 048 (with RAM62K words, the top internal link).Model: CPM2A-40CDT-D. Power supply: DC power supply.
Output type: Transistor sinking.
Inputs points: 24 points.
Outputs points: 16 points.Includes text book, cassette tape, and input switch board.Unit classification: CJ1 Special I/O Units.
Product name: Position Control Units,
(High Speed type).
Specifications; Control method/Control,
output interface:Pulse-train line-driver,
output with Pulse Counter Function;
Number of control axes : 4 axes.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0.31A; 24V, --.
Standards: UC1, CE.
Motion Control Capabilities with Unit,
Synchronization and Even Higher Speed CJ1M-CPU12-ETN .
Models are available with 2 or 4 axes,
and open-collector or line-driver outputs.
The CJ1W-NC214/NC414 have open-collector outputs,
and the CJ1W-NC234/NC434 have line-driver outputs.
Control 2 or 4 Axes High-speed, high-resolution,
position control is possible for servomotors ,
and pulse motors, and even linear motors,
and direct drive motors CJ1M-CPU12-ETN Manual.