Host Link Units CXONE-AL10D-V4-UP CX-Motion-NCF Ver. 1.9 Manual OMRON CXONE-AL10D-V4-UP Installation Guide

Unit type: CJ1 Basic I/O Units.
Product name: Relay Contact Output Units.
Specifications: Output type , --;
I/O points, 8 inputs;
Maximum switching capacity, 250VAC/24VDC, 2A;
Commons, Independent contacts;
External connection, Removable terminal block.
No. of words allocated: 1 word.
Current consumption: 5V, 0 CXONE-AL10D-V4-UP Manual. 09A; 24V, 0.048A max.
Standards: UC1, N, L, CE CXONE-AL10D-V4-UP
A Wide Range of Basic Output,
Units for High Speed Output,
and Different Applications.
These Output Units receive the ,
results of output instructions ,
from the CPU Unit and perform ON/OFF,
control for external devices.
High-speed Output models CJ1W-OD213 and,
CJ1W-OD234 can help to increase system.
throughput CXONE-AL10D-V4-UP Manual. Specifications: Optical ring (HPCF cable).Supply voltage: 100 to 120 or 200 to 240 VAC (automatic voltage setting), 50/60 Hz
Operating voltage range: 85 to 132 or 170 to 264 VAC
Power consumption: 150 VA max.
Output capacity: 8 A, 5 VDCName: e-CON Connectors.
Specifications: Inputs/Outputs;
8 inputs /8 outputs; NPN;
With Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet CXONE-AL10D-V4-UP Manual.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site OMRON CXONE-AL10D-V4-UP Installation Guide.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error OMRON CXONE-AL10D-V4-UP Installation Guide. Model : CV500-IPS01.
Input: 100 to 120/200 to 240 VAC Output: 2A, 24 VDCModel : CVM1-DRM21-V1.
CVM1/CV series for.For Hand-held Programming Console.
2m.Number of outputs: 8 pts.
Input Voltage: 250 VAC, 24 VAC OMRON CXONE-AL10D-V4-UP Installation Guide.
Max Switching Current: 2 Amps.
Common Type: Independent.I/O capacity: 512 pts (2, 048 max. with remote I/O).
Execution time: Basic: 0.15 µs min.Special: 0.6 µs min.
Unit type: CS1 Basic I/O Units.
Product name: Relay Output Units.
Specifications:12 to 24 VDC,
0.3A 64 outputs; Sinking.
Mountable Racks: CPU Rack, CS1W-BC,
@@3, Yes, @@2, Yes;;
C200HX/HG/HE Expansion I/O Rack, No CXONE-AL10D-V4-UP CX-Motion-NCF Ver. 1.9.
CS1 Expansion Rack, CS1W-BI,
@@3, Yes, @@2, Yes;
CS1 Long distance Expansion Rack, Yes;
SYSMAC BUS Slave Rack, No.
Words required: 4 words.
Current consumption: 5V system, 0. CXONE-AL10D-V4-UP Manual. 39A;
26 V system, --.
Standards: UC1, N, L, CE.
Multi-application Controllers:
From High-performance Machine C,
Highly Reliable Process Control.