OMRON CP1E-N30DT-A Manual CP1E-N30DT-A Software OPERATION MANUAL

CV500-FH SYSMAC BUS PC Unit Floppy/Hard Disk Drive For 200 VAC CV500-FHD02.Power supply: DC power supply.
Output method: Relay output.
Inputs points: 6 points.
Outputs points: 4 points.Model: C200H-B7A21.
I/O points: 16 output points and 16 input points or 15 input points + 1 error
input.
Weight: 300g max CP1E-N30DT-A OPERATION MANUAL. Unit type: 10 I/O points 6 inputs; 4 outputs, Connector.
Input: 6 points: 24 VDC CP1E-N30DT-A
Output: 4 points: transistor (sourcing).
Clock: Yes.
Slaves with the Complex Functionality Needed,
for Distributed Blocks.
Programmable Slaves combine devices, such as sensors and actuators,
into one functional unit that is treated as a DeviceNet slave.
Programmable Slaves greatly facilitate device distribution,
and functional organization CP1E-N30DT-A OPERATION MANUAL.
They help standardize programming between units and reduce the amount of,
programming required at the master.
I/O and operational checks can be performed for each functional unit,
rather than waiting.
for final system assembly, as with conventional distributed I/O systems. Model: CPM2C-32EDTC. Units with 32 I/O points
2 Fujitsu connectors.
Inputs: 16 inputs CP1E-N30DT-A OPERATION MANUAL.
Outputs: 16 outputs.
Input type: 24 VDC.
Output type: sinking transistor.I/O Control UnitOutput method: Analog resolution: 1/6000.
Analog Inputs: 4.Name: e-CON Connector Type.
Specifications: Analog outputs;
2 outputs.
Standards: CE, UC, UC1.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Unit,
helps to detect errors on site.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the errorr CP1E-N30DT-A Manual. CP1W-CIF41.
One Ethernet Option Board can be mounted in either option board slot 1 or 2.
Note: Cannot be used for the CP1L-L10.CV500-LK Special I/O Unit CV Host Link Unit 2 Ports CV500-LK201.
2-port (RS-232C, RS-232C/RS-422)) Built CP1E-N30DT-A Manual. Output type: Relay.
Inputs points: 12 points.
Outputs points: 8 points.Connects SYSMAC LINK Unit, Controller Link Unit to CPU Unit.
For 2 Unit.