OMRON CPM2C-20CDT1C-D Manual CPM2C-20CDT1C-D Operation Manual

Unit type: CS1 CPU Bus Unit.
Product Name: MECHATROLINK-II,
compatible Motion Control Unit.
Specifications: Control modes: Position,
speed, or torque control via MECHSTROLINK-II,
Control axes: 32 axes max.
(30 physical axes, 2 virtual axes).
Internal programming language: Special,
motion control language CPM2C-20CDT1C-D Operation Manual.
No. of unit numbers allocated: 1.
Current consumption: 5V, 0 CPM2C-20CDT1C-D80A; 26V, --.
Standards: UC1, CE.
Improve Equipment Design Efficiency and,
Shorten Tact Time.
Control Servos for up to 16 axes in a,
motion network with one Position Control,
Unit that supports MECHATROLINK-II .
MECHATROLINK-II is a registered trademark,
of the MECHATROLINK Members Association. Specifications: 8 Kwords without clock CPM2C-20CDT1C-D Operation Manual. C500-NC Special I/O Unit Position Control For pulse motors 2 axes C500-NC222-EUM: 63.2K words.
DM: 6K words.
EM: 6Kx16 banks(96K) words.
Instruction processing time (basic instructions): 0.1 µ.s min.
No. of I/O points: 1, 184 points.
Max. no.of con-necting Expansion I/O Racks: 3 Racks.
Max. no. of connecting High-density I/O Units(i.e., Group-2): Unavailable.
Max. no. of con-necting Special I/O Units: 10 CPM2C-20CDT1C-D Operation Manual.
RS-232C: NO.Ranges : -10 to + 10V, 0 to 10V, 0 to 5V, or 0 to 20mA.
Power supply : Built-in, DC/DC converter.Protector for Simple Expansion I/O Rack connector CV500-COV04Specifications: 4 Kwords without clock.Model: C1000H-TER01.
Each node requires one of the ends of the network.Name: Three-tier Screw Terminal Block.
Specifications: Inputs; 8 inputs; PNP;
Without Short-circuit and,
Disconnected Line Detection.
"Easy" and "Flexible" system expansion,
with linked CC-Link and CompoNet.
Branching is easily made with CompoNet.
Wiring material cost can be reduced.
Bit-level I/O distribution reduces,
wiring in the system.
A wide variety of CompoNet Slave Units,
contribute to system size reduction.
Seven-segment Display on the Gateway Uniit,
helps to detect errors on site CPM2C-20CDT1C-D Manual.
The Participation Flags and Communications,
Error Flags can be checked at the Host,
Controller to detect the location and,
content of the error. Model: CPM2C-10C1DT1M-D. CPU Unit: Unitss with 10 I/O points CPM2C-20CDT1C-D Manual.
2 MIL connectors.
Inputs: 6 inputs.
Outputs: 4 outputs.
Input type: 24 VDC.
Output type: sourcing transistor.
Internal clock: Yes.