OMRON CS1D-CPU42S SYSTEM MANUAL Programmable Terminals Manual

CPU Unit: CP1H-XA CPU Units.
Specifications: CPU type, Memory capacity: 20K steps
High-speed counters: 100 kHz, 4 axes Pulse outputs:
100 kHz, 2 axes (Models with transistor outputs only);
Analog inputs: 4, Analog outputs: 2;
Power supply, DC power supply; Output method, Transistor output (sourcing);
Inputs, 24; Output, 16 CS1D-CPU42S Manual.
Standards: UC1, N, L, CE.
4 Axis Position Control and Comprehensive Programmable Controller CS1D-CPU42S
The CP1H-X with pulse outputs for 4 axes.
The CP1H-Y with 1-MHz pulse I/O.
The CP1H-XA with pulse outputs for 4 axes and built-in analog I/O. Unit classification: CJ1 Special I/O Units.
Product name: Temperature Control Units.
Specifications; No. of loops: 4 loops;
Temperature sensor inputs: Thermocouple,
input (R, S, K, J, T, B, L);
Control outputs: Open collector PNP outputs (pulses) CS1D-CPU42S Manual.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0.25A; 24V, --.
Standards: UC1, N, L, CE.
A Single Unit Performing All the Functions of,
4 Temperature Controllers.
A Special I/O Unit with direct input,
of thermocouple or resistance thermometer,
PID control with 2 degrees of freedom,
and open collector output CS1D-CPU42S Manual. Model: C200H-B7AI1.
I/O points: 16 points or 15points and 1 error input
Weight: 200g max.Unit classification: CJ1 Special I/O Units.
Product name: Temperature Control Units.
Specifications; No OMRON Programmable Terminals Manual. of loops: 4 loops;
Temperature sensor inputs: Platinum ,
resistance thermometer input(JPt100, Pt100);
Control outputs: Open collector NPN outputs (pulses) OMRON Programmable Terminals Manual.
No. of unit numbers allocated: 2.
Current consumption: 5V, 0.25A; 24V, --.
Standards: UC1, N, L, CE.
A Single Unit Performing All the Functions of,
4 Temperature Controllers.
A Special I/O Unit with direct input,
of thermocouple or resistance thermometer,
PID control with 2 degrees of freedom,
and open collector output OMRON Progrrammable Terminals Manual CS1D-CPU42S SYSTEM MANUAL. Connects CQM1H to G730 SYSMAC BUS remote I/O
modules; max. 64 I/O (32 or 16 inputs or outputs, DIP switch selectable)
Number of I/O points per Master: 128
Communications cycle time: 187.5 kbps
Maax CS1D-CPU42S Manual. transmission distance: 200 m
One master and two expansions allowed per systemC500-OD I/O Unit Transistor Output 16 pts C500-OD219.
DC12-24V 2.1A.