OMRON E5CN-HTC2MD-500 MANUAL E5CN-HTC2MD-500 Communications Functions User's Manual

Appearance: Shielded, M30.
Sensing distance: 8 mm.
Output configuration: DC 2-wire, (3)-(4) pin arrangement.
Model: Operation mode, NO.
Chip-immune Inductive.
Proximity Sensor.
Correct operation even with aluminum or iron chips sticking,
to the Sensor.
Only the sensing object is detected.
Pre-wired Smartclick Connector Models also available E5CN-HTC2MD-500 User's Manual. Sensing method: Narrow-beam reflective E5CN-HTC2MD-500
Connection method: Pre-wired.
Sensing distance: 90±30 mm.
Model: PNP output.
Small 2.5-mm-diameter Spot Ideal for.
Detecting Small Workpieces.
Tiny workpieces as little as 0.1 mm in diameter can be,
detected with the 2.5-mm-dia. spot.
The narrow beam enables sensing from small slots or holes.
The small spot of light enables visual checking of sensing,
spot position E5CN-HTC2MD-500 User's Manual.
IP67 degree of protection, mutual interference prevention,
and EN standard compliance. Type: 3 wire, shielded.
Shape: M5.
Detection range: 1mm.
Connection mode: lead type (2m).
Wire specification: PVC (oil resistant).
Action mode NC.
PNP output.
Proximity sensors for preferred world top performance and quality.
Standard type of magnetic metal detection E5CN-HTC2MD-500 User's Manual.
Rich variety.
According to the conditions to choose the most suitable models.
Anti interference function of different frequency range models.
Has excellent environmental performance.
Standard wire material for oil resistant PVC.
Test face using cutting oil material.
Standard wire jacket. Appearance: Standard.
Sensing method: Throughbeam type(with slot).
Connecting method: Connector(4 poles).
Sensing distance: 5 mm (slot width).
Output configuration: Dark-ON/Light-ON (selectable).
Indicator mode: No incident light.
Model: NPN output.
Global Standard Slot-type.
photomicrosensors with 50- to,
100-mA direct switching capacity.
Series includes models that enable switching betweeen,
dark-ON and light-ON operation E5CN-HTC2MD-500 MANUAL.
Response frequency as high as 1 kHz.
Easy operation monitoring with bright light indicator.
Wide operating voltage range: 5 to 24 VDC.
Models in which the light indicator turns ON for ddark-ON,
operation are also available E5CN-HTC2MD-500 MANUAL.
A wide range of variations in eight different shapes.
Flexible robot cable is provided as a standard feature.