OMRON H8PS-32B REFERENCE MANUAL H8PS-32B Manual

Control output: Contact output: DPDT (time-limit output).
Supply voltage: 24 VDC.
11-pin models.
Solid-state Timer with Valuable Multiple-time.
Ranges and Multiple-operating Modes.
Handles a wide range of applications through eight operating modes.
With H3BA-N8H models, the output type can be switched H8PS-32B REFERENCE MANUAL.
between time-limit DPDT and time-limit SPDT + instantaneous.
SPDT using a selector H8PS-32B
Setting rings (order separately) to enable consistent settings.
and to limit the setting range.
Panel Covers (order separately) to enable various panel.
designs.
CE marking.
UL, CSA and CCC certification, conforms to LR. Type: H7CX-R Series.
Classification: Tachometer.
Configuration: Tachometer H8PS-32B REFERENCE MANUAL.
External connections: 11-pin socket.
Settings: 1-stage (1 input and output).
Display digit: 6 digits.
Outputs: Contact output (SPDT).
Power supply voltage: 12 to 24 VDC/24 VAC.
Ultra-compact Counter Provides More,
Complete Functionality.
Basic Features.
Short body with depth of only 59 mm (for 12 to 24-VDC Models with,
Screw Terminals).
Better readability with character height of 12 mm on 4-digit models,
and 10 mm on 6-digit models H8PS-32B REFERENCE MANUAL.
The present value display characters can be switched between red,
green, and orange.
Safety and Reliability.
New set value limit and counter functions have been added.
Other Features.
Front Panel can be changed to white or light gray.
New models with two tachometer inputs and two tachometer outputs have,
been added to the series. Supply voltage: 12 VDC.
Control output: Contact output, DPDT (time-limit DPDT,
or time-limit SPDT + instantaneous SPDT) Changed using a switch.
Eight-mode Timer.
Multiple time ranges and operating modes let you cover a wide,
range of applications.
The time-limit DPDT output contacts can be changed to time-limit,
SPDT and instantaneous SPDT output contacts using a switch.
Sequence checks are easily performed by setting an instanta,
neous output to 0.
Start signal control for the H3DK-M. Type: H7CZ.
Configuration: 1-stage preset counter.
External connections: 8-pin socket.
Settings: 1-stage.
Display digits: 6 digits.
Outputs: Contact output (SPDT).
Power supply voltage: 12 to 24 VDC/24 VAC.
Easy to Use and Easy to Read.
Basic Features.
Character height of 10 mm for better readability.
Operation is simplified by the Up Key for each digit.
Saffety and Reliability H8PS-32B Manual.
Power supply circuit and input circuits are isolated inside the Counter.
Set value limit function prevents unexpected operation of output,
devices caused by setting mistakes.
Output counter function helps inn managing the service life of the,
Counter or the load H8PS-32B Manual.
Other Features.
Waterproof, dust-proof structure (UL508 Type 4X and IP66).
Key protection.