OMRON S8JX-03512 Manual S8JX-03512 EtherNet/IP Connection Guide

Safety sensors to detect contacts by.
mounting to moving parts of hazards.
Conforms to PLe/Safety Category 3 in combination with the,
dedicated controller.
(applied when internal relays with forcibly guided contacts,
disable hazard source directly).
Simple one-unit structure integrating sensor and cover S8JX-03512 EtherNet/IP Connection Guide.
Resistant to the side force.
Can be used in various applications S8JX-03512
Sensor length: 150 mm to 6,100 mm, Height: 34 mm to 80 mm.
Models with sealing covers for doors are provided(SGE-245L).
Certified standard: EN1760-2 (Safety Edge Standard). Power rating: 200 W.
Input voltage: 100 to 120 VAC, 200 to 240 VAC (allowable range: 90 to 132 VAC,
180 to 264 VAC, or 254 to 373 VDC(Select with the switch S8JX-03512 EtherNet/IP Connection Guide. )*2).
Output voltage: 5 V VDC.
Output current: 40 A.
Built-in fan: None.
Model with terminal block facing upward.
High Reliability at a Reasonable Cost.
Reliable, Basic Power Supplies That,
Contribute to Stable Equipment Operation.
High Reliability: Enhanced abnormal overvoltage,
resistance and lightning surge resistance for stable,
operation even with an unstable input voltage S8JX-03512 EtherNet/IP Connection Guide.
Long Life: Japanese 105°C electrolytic capacitors are used,
to achieve stable quality and long life. A reliable 3-year warranty.
Wide Input Ranges: 100 to 120 VAC and 200 to 240 VAC,
Full Lineup: Models are available for the main output,
voltages and capacities used in FA applications.
Global Standards: Conforms to CE (all models),
Approved for UL (all models) and CCC (15 to 150-W models).
Easy mounting to DIN Rails with Mounting Brackets (sold separately).
Refer to Period and Terms of W. Control power supply voltage: 100/110 VAC.
Input: DC or AC (selectable); input voltage range: 10 to 300 V: Operating mode,
ON-delay; OFF-delay; Startup lock.
Overvoltage/Undervoltage Monitoring.
Relay for AC and DC Input.
Detect overvoltages or undervoltages (switch select,
able) from 4 mV to 300 V.
Detect undercurrent, reverse current, or overcurrent in,
DC circuits using shunt (SDV-FL).
Detect three-phase AC current for under and/or overcur,
rent using current converter.
Avaailable in 7 supply voltage configurations S8JX-03512 Manual.
Single-function model with ON-delay, OFF-delay, or star,
tup lock settings (SDV-FH@T).
Select either AC or DC voltage input.
Polarity can be specified (SDV-FL) to enable easy re,
verrse current detection S8JX-03512 Manual.
Selectable reset value range from 2% to 30% of operat,
ing value (SDV-F).
LED operation indicator.
UL/CSA approval (SDV-F@).