OMRON ZS-PSW11 USER'S MANUAL Controllers NS SMARTMONITOR Manual

Classification: Standard.
Contact gap: G (0.5 mm).
Drip-proof terminal protective cover: Not provided.
Actuator: Spring plunger; Low OP.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types ZS-PSW11 Manual ZS-PSW11
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Type: Single-function Amplifier Unit.
Power supply: 24 VDC.
Output type: NPN.
Simple to use.
Detection abilities close to human vision ZS-PSW11 Manual.
One-touch automatic setting for stable detection.
2.2-inch monitor integrated in compact housing.
Sensor Heads with field of view up to 150 mm. Name: Communications Interface Unit (RS-232C).
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Optical system: positive and negative radiation.
Detection distance: 25 positive and negative 2mm ZS-PSW11 Manual.
Beam shape: linear beam.
Beam diameter: 2.2mm * 45 M.
Resolution: 0.6 M.
Cable length: 2m. Connection method: Pre-wired.
Cable length: 5 m.
Sensing distance: 50 ± 10 mm.
Model: PNP output.
A CMOS Laser Sensor That’s OMRON Controllers Manual.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece OMRON Controllers Manual.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm. Power supply voltage: 24V DC±10%, Ripple (p-p): 10%.
Current consumption: 3.0A max.
Discharge voltage: ±7.5kV.
Discharge method: Variable DC.
Ionization time: 1 s.
Ion balance: ±10V max OMRON Controllers Manual.
Amount of ozone generated: 0.01 ppm,
(Measured at a distance of 50 mm from air outlet).
Indicators: Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red).
Main functions: Ion balance adjustment (Automatic and manual).
External output (for both cleaning and alarm outputs): Photo MOS relay output,
(NPN or PNP)Applied voltage: 30VDC max., load current: 100mA max.
Residual voltage: 1V max.
Discharge stop input: No-voltage contact input, ON: 0V short circuit,
OFF: Open (leakage current: 0.1mA max.).
Ambient temperature range: 0 to 50˚C (No icing or dewing).
Ambient humidity range: 35%% to 65% (No icing or dewing) ZS-PSW11 USER'S MANUAL.
Weight (Packaged): Approx. 2 kg (Approx. 3 kg).
Material: Body:Aluminum, ABS Electrode needle: Tungsten.
Accessories: Instruction sheet, I/O connector, Stand, Streamer.
This ionizer series is designned to go anywhere ZS-PSW11 Manual.
All models are easily installed on narrow,
workbenches or in high positions where earlier,
models presented installation issues.