OMRON ZX-SW11 Introduction Manual Position Control Units Inductive Displacement Manual

Optical fiber division.
Fiber length: 1 meters.
Allowable bending radius: 30mm above. Type: Narrow View/Single Function.
NPN.
Low-cost but advanced Smart.
Sensors combining benefits of.
optical and vision sensors.
Sensor integrated with light for easy installation.
Easy operation by selecting icons while watching ZX-SW11 Manual.
LCD monitor.
Ultra-high speed response for fast-moving.
production lines ZX-SW11 Connection method: Pre-wired.
Cable length: 2 m.
Sensing distance: 100 ± 35 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications ZX-SW11 Manual.
Long-distance model for up to 1,000 mm. Optical system: Regular reflective; Diffuse reflective.
Measurement range: Height direction, 22.3±0.5 mm, 10.6±0.4 mm;
Width direction, 3 mm (typical).
Resolution: Height direction, 0.25 μm;
Width direction, 5 μm (3mm/631pixels).
ZG2 debut!
Achieving stable measurement.
through innovative technology. Cable length: 8 m ZX-SW11 Manual.
Quantity: 1.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. A communication gateway that connects smart sensors to CompoNet.
High speed intelligent sensor measurement data collection at PLC or PT OMRON Position Control Units Manual.
Only need to connect the communication cable can start.
Trigger measurement and acquisition of the decision result, and a control signal line with no need of wiring OMRON Position Control Units Manual. Name: Communications Interface Unit (RS-232C).
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. Optical system: diffuse type.
Detection distance: 50 positive and negative 5mm.
Beam shape: linear beam OMRON Position Control Units Manual.
Beam diameter: 1.0mm * 30 m.
Resolution: 0.25 M.
Cable length: 0.5m. AC adapter: incidental.
Body size: 290mm.
Slim and lightweight, optional 3 models,
Play excellent setting.
Narrow operating table and high can also be a simple setting.
Thin 6cm quality 1kg* slim, lightweight body. (ZJ-FW029)Actuator: Sealed (Booted); Sealed roller arm lever; AC.
Mounting: Base mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC moddels have also been added,
to the series ZX-SW11 Introduction Manual.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with gground terminals have CE marking ZX-SW11 Manual.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)