OMRON ZX-GT28S11 Inductive Displacement Introduction Manual

Power supply: DC.
Output type: PNP.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website. General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches ZX-GT28S11 Inductive Displacement. They provided high durability and high,
breaking capacity ZX-GT28S11
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also been added,
to the series.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with ground terminals have CE marking ZX-GT28S11 Inductive Displacement.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)Optical fiber division.
Fiber length: 1 meters.
Allowable bending radius: 30mm above. Size: 8 dia.
Type: Standard type.
Sensing distance: 10 mm.
Resolution (See note.): 0.4 μm.
For the most recent information on models that have been,
certified for safety standards, refer to your OMRON website ZX-GT28S11 Inductive Displacement. Connection method: Pre-wired connector.
Cable length: 0.5 m.
Sensing distance: 50 ± 10 mm.
Model: PNP output.
A CMOS Laser Sensor That’s.
Optimum for Simple Measurements.
A resolution of 0.002 mm that’s suitable for simple measure ments.
Stable measurements for any type of workpiece.
Models available with four different distance specifications.
Long-distance model for up to 1,000 mm.Actuator: Hinge lever.
Best-selling Basic Switch Boasting.
High Precision and Wide Variety.
A large switching capacity of 15 A with high repeat accuracy.
A wide range of variations in contact form for your selection: basic,
split-contact, maintained-contact, and adjustable contact gap types.
A series of standard models for micro loads is available.
A series of molded terminal-type models incorporating safety,
terminal protective cover is available. Actuator: Sealed (Booted); Sealed roller plunger; AC.
Mounting: Diagonal side mounting.
Approved standards: UL CSA.
General-purpose Enclosed.
Switches with High Breaking.
Capacity and High Durability.
Z General-purpose Basic Switches are built into ZE, ZV,
and ZV2 Switches. They provided high durability and high,
breaking capacity.
X Basic Switches with magnetic blowout are built into XE,
XV, and XV2 Switches. DC models have also beeen added,
to the series ZX-GT28S11 Introduction Manual.
Three mounting methods (side, base, and diagonal side),
and many types of actuator are available.
Terminals face the front when the cover is removed for,
easy connection.
Switches with gground terminals have CE marking ZX-GT28S11 Introduction Manual.
Approved by UL, CSA, and CCC (Chinese standard).
(Ask your OMRON representative for information on approved models.)